Cisco 2621 User Manual page 17

allows interfaces to be upgraded to accommodate network expansion. The Cisco 2651 provides a
scalable, secure, manageable remote access server that meets FIPS 140-1 Level 2 requirements. This
section describes the general features and functionality provided by the Cisco 2651 router.
Operation of the Cisco 2651 Router" section on page 10
addresses FIPS 140-1 requirements.
The Cisco 2651 Cryptographic Module
The metal casing that fully encloses the module establishes the cryptographic boundary for the router,
all the functionality discussed in this document is provided by components within the casing. Cisco IOS
features such as tunneling, data encryption, and termination of Remote Access WANs via IPSec, Layer
2 Forwarding (L2F) and Layer 2 Tunneling Protocols (L2TP) make the Cisco 2600 an ideal platform for
building virtual private networks or outsourced dial solutions. Cisco 2600`s RISC-based processor
provides the power needed for the dynamic requirements of the remote branch office, achieving wire
speed Ethernet to Ethernet routing with up to 25 thousand packets per second (Kpps) throughput
capacity.
Figure 1
Figure 1
Module Interfaces
The interfaces for the router are located on the rear panel as shown in
Figure 2
Cisco 2651
78-13697-01
shows a Cisco 2651 modular access router.
Cisco 2651 Router
RPS
ACTIVITY
Physical Interfaces
SERIAL 1
SERIAL 0
CONN WIC
CONN
2A/S
SEE MANUAL BEFORE INSTALLATION
W1
LINK
ETHERNET 1 ACT
10/100BaseT
Ethernet 0/1
(RJ-45) 10/100BaseT
Ethernet 0/0
(RJ-45)
Cisco 2651
SERIAL 1 100-240V– 1A
50/60 Hz 47 W
SERIAL 0
CONN WIC
CONN 2T
SEE MANUAL BEFORE INSTALLATION
W0
LINK ETHERNET 0 ACT
CONSOLE AUX
Auxiliary
port (RJ-45)
Console
port (RJ-45)
Cisco 2651 Modular Access Router Security Policy
Cisco 2651 Modular Access Routers
provides further details on how the router
Cisco 2600
SERIES
Figure 2.
"Secure
3