Download
Share
Print this page
Radwin 5000 Installation Manual
  1. Manuals
  2. Brands
  3. Radwin Manuals
  4. Conference System
  5. 5000
  6. Installation manual
Radwin 5000 Installation Manual

Radwin 5000 Installation Manual

Hide thumbs Also See for 5000:

Advertisement

Quick Links

Download this manual
INSTALLATION GUIDE
RADWIN 5000
Document version 24
July 2024

Advertisement

loading
Need help?

Need help?

Do you have a question about the 5000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Radwin 5000

Summary of Contents for Radwin 5000

  • Page 1 INSTALLATION GUIDE RADWIN 5000 Document version 24 July 2024...

  • Page 2: Table Of Contents

    Contents Introduction ............................. 5 Scope of This Document ........................5 RADWIN 5000 Overview ........................5 Sector .............................. 5 System Components and Connectivity ................... 6 Base Stations ........................... 7 Subscriber Units (SU) ........................8 POE sources ............................ 9 POE Cable ............................10 External Antennas .........................
  • Page 3 Safety Practices and Provisions ......................56 Scope of this Chapter ........................56 Preventing Overexposure to RF Energy ..................... 56 Grounding............................56 Protection against Lightning ......................56 General .............................. 56 EMC and Safety compliance ......................57 RADWIN 5000 Installation Guide July 2024...
  • Page 4 Certified Antennas ..................... 67 For Deployment in US/Canada ......................67 For Deployment in EU member states ....................77 Appendix E. Regulatory Compliance ....................81 Appendix F. Revision History ......................91 Appendix G. Conditions of Use ....................... 94 RADWIN 5000 Installation Guide July 2024...

  • Page 5: Introduction

    For legacy JET, LFF HBS 5200, SFF HBS 5050 base stations, or LFF/SFF HSU subscribers - please refer to RW5000 Install Guide Aug-2022. For guidance on how to configure and operate RADWIN 5000 radios and sectors, please refer the RADWIN 5000 Configuration Guides.

  • Page 6: System Components And Connectivity

    • (Optional, for any HBS other than 5000L): Fiber / RJ45 SFP transceiver installed in SFP slot RADWIN 5000 General Connection Scheme These products shall be located in a Restricted Access Location and be accessible only to a certified person familiar with the unit operation and possible hazards.

  • Page 7: Base Stations

    (12dbi integrated antenna) (connectorized for external antenna) 5000L 6.4 GHz (16dbi integrated antenna) JET PRO (integrated beamforming antenna) JET DUO NEO, NEO DUO, JET AIR and JET AIR DUO (integrated beamforming antenna) (integrated beamforming antenna) RADWIN 5000 Installation Guide July 2024...

  • Page 8: Subscriber Units (Su)

    (2x integrated antennas and connectorized for 2x external antennas) Subscriber Units (SU) There are several types of RADWIN 5000 subscriber units: SU PRO / SU AIR / Alpha / Alpha-PRO SU PRO / SU AIR / Alpha / Alpha-PRO Integrated...

  • Page 9: Poe Sources

    POE sources RADWIN POE units (POE power supplies) are available for any standard type of power feed (AC or DC), for indoor or outdoor installation scenarios. RADWIN IDU series POE switches are also available. See Appendix A for more details.

  • Page 10: Poe Cable

    POE Cable POE feed for RADWIN ODUs must be connected using an outdoor rated CAT-5e STP cable, 24 AWG, terminated with shielded RJ-45 connectors. RADWIN ODU-IDU cables in various lengths are available for purchase (see WINPro catalog). These cables are shipped ready for installation with an IP-67 protective gland pre-installed on one end of the cable for connection to the ODU, and with RJ-45 male shielded connectors on both ends.

  • Page 11: External Antennas

    External Antennas Various RADWIN sector and directional antennas are available for connectorized base station and subscriber radios. All RADWIN antennas are supplied with mounting kit and 2x low attenuation 1.2 meter RF cables (LMR-400) with N-type connectors at both ends.

  • Page 12: Lightning Protector Units (Lpu)

    Lightning Protector Units (LPU) RADWIN LPU are robust outdoor units designed to be installed on a pole or on a wall at each end of the ODU-IDU cable. It has two ports with protective glands for CAT-5e cables and a grounding lug. Each LPU is supplied with a 0.5m CAT5e cable and a stainless-steel pole mounting band.

  • Page 13: Installation Steps

    See Connect POE cable for details on POE port locaiton for specific models. Figure 1: Connecting laptop to a radio unit Accessing Web UI To connect to any ODU via POE port using a PC/laptop: 1. Configure a static IP address for the Ethernet NIC RADWIN 5000 Installation Guide July 2024...

  • Page 14: Updating Network Settings

    5. Click Save and confirm the network parameters update 6. Connect the radio unit to network device / PC with IP and VLAN configured accordingly 7. Ping radio unit using the new IP address to verify update. RADWIN 5000 Installation Guide July 2024...

  • Page 15: Mounting Integrated Odus

    The standard mounting kit can be used on a thin, medium, or thick pole. Thin Pole Diameter 3/4” to 1 1/2” (2cm to 4cm) Medium Pole Diameter 2” to 3” (5cm to 7.5cm) Thick Pole Diameter larger than 3” (7.5cm) RADWIN 5000 Installation Guide July 2024...
  • Page 16 Nuts until the end of the Hex Head Screw. For thin pole: The mounting kit is preassembled for mounting on a medium sized 2-3” pole. If you are mounting the ODU on a small sized ¾ -1½” pole, perform the following: RADWIN 5000 Installation Guide July 2024...
  • Page 17 6. Open the Pole Clamp allowing the ODU Holder to attach onto the pole, then close the Pole Clamp on the M8X90 Hex Head Screw. Thin Vertical Pole ¾” -1½” Medium Vertical Pole 2 - 3” RADWIN 5000 Installation Guide July 2024...

  • Page 18: Wall Mount Installation

    8. Use worm drive clamps (not supplied), threaded through the holes as shown: Figure 2: Mounting kit on a thick pole .Wall Mount Installation 1. Remove the mounting kit from the ODU packaging box. 2. Disassemble all parts from the ODU Holder. RADWIN 5000 Installation Guide July 2024...

  • Page 19: Su Or Alpha Integrated, 5000L Integrated, Neo, Neo Duo, Jet-Air, Jet-Air Duo, Multisector Integrated, Outdoor Poe

    Figure 3: SU Integrated, Alpha Integrated, NEO, NEO DUO, JET AIR, JET AIR DUO Figure 5: Outdoor PoE If mounting one of these units on a horizontal pole or on a wall, use the radio vertical adaptor RADWIN 5000 Installation Guide July 2024...

  • Page 20: Jet Pro, Jet Duo

    Figure 7 JET PRO or JET DUO radio unit mounted on a vertical pole When mounting a JET PRO or JET DUO unit on a horizontal pole or on a wall, the radio vertical adaptor is not needed: RADWIN 5000 Installation Guide July 2024...
  • Page 21 Figure 8: JET radio unit mounted on a horizontal pole Figure 9: DUO radio unit mounted on a horizontal pole RADWIN 5000 Installation Guide July 2024...

  • Page 22: Mounting Multisector Integrated For 360-Degree Coverage

    It is possible to mount a MultiSector Base Station Integrated back-to-back with a MultiSector antenna (or an additional MultiSector Integrated base station) on the same pole. Do this as follows: 1. Fasten a radio holder to one MultiSector unit. Make sure you use a radio holder with the screw threading. RADWIN 5000 Installation Guide July 2024...
  • Page 23 Figure 13: MultiSector Integrated unit with radio holder on a pole 3. Use the additional radio holder included in the MultiSector (the one without threading), and fasten this around the pole to the first radio holder as shown: RADWIN 5000 Installation Guide July 2024...
  • Page 24 4. Fasten the MultiSector antenna to the second radio holder as shown: Figure 15: Fasten the MultiSector antenna See Connecting MultiSector Integrated Units to Antennas for a description of how to connect an external antenna (standard antennas or a MultiSector antenna). RADWIN 5000 Installation Guide July 2024...

  • Page 25: Mounting Multisector Connectorized

    1. Recommended diameter of the pole is 2 to 4 in (5-10 cm).  Use worm-drive clamps to install the supporting mount on a pole. The included worm-drive clamps support poles whose diameter is 2 to 4 in (5 to 10 cm). RADWIN 5000 Installation Guide July 2024...
  • Page 26 Make sure the MultiSector Base Station Connectorized is attached firmly to the mount: 3. Push down on the MultiSector Base Station Connectorized until you hear a click, then fasten the locking screw as shown (the locking screw is found on the mounting tongue): RADWIN 5000 Installation Guide July 2024...

  • Page 27: Wall

    2. Place the mounting tongue of the MultiSector Base Station Connectorized unit in the indicated hole of the supporting mount,while aligning the vertical channel of the MultiSector Base Station Connectorized with the flange ofthe supporting mount. Make sure the MultiSector Base Station Connectorized is attached firmly to the mount: RADWIN 5000 Installation Guide July 2024...
  • Page 28 3. Push down on the MultiSector Base Station Connectorized unit until you hear a click,then fasten the locking screw as shown (the locking screw is found on the mounting tongue): RADWIN 5000 Installation Guide July 2024...

  • Page 29: Mounting Su Or Alpha Pro Connectorized

    SU Connectorized or Alpha PRO Connectorized is mounted on a pole using worm-drive clamps. 1. Place the unit on a pole. 2. Fasten the unit to the pole using worm-drive clamps. Figure 16: SU Connectorized mounted with worm drive clamps RADWIN 5000 Installation Guide July 2024...

  • Page 30: Installing Su Eco

    L-shape bracket and mounting kit hardware Cable Tie Declaration of AC POE Unit AC Power Cable Compliance The product is shipped in a pack of 4x SU ECO units, with components stored on stacked trays: RADWIN 5000 Installation Guide July 2024...

  • Page 31: Initial Assembly

    Attach the reflector to the bracket using 2x bolts in top and bottom positions • Insert the radio unit into the cutout, aligning the flat part with the upper side of the radio • Secure the radio using 2x bolts in left and right positions RADWIN 5000 Installation Guide July 2024...

  • Page 32: Mounting On A Vertical Pole

    Attach the adapter to the L-shaped bracket – the radio is now ready for pole installation Mounting on a vertical pole Attach and secure the bracket on the pole • Connect POE cable and POE device (see relevant chapters below) • Perform alignment and tighten the bolts • RADWIN 5000 Installation Guide July 2024...

  • Page 33: Lightning Protection Units

    • Make sure the LPU is oriented with the cable glands oriented towards the bottom. • Mount one LPU near the radio unit, and the second near the PoE: 1. Insert the metal band through the slots on the LPU as shown: 2. Tighten the metal band. RADWIN 5000 Installation Guide July 2024...
  • Page 34 5. Connect the cables to the LPU’s sockets, and the glands around the cables as shown: 6. Route one CAT-5e cable up to the radio unit, and the other down to the PoE (via the lower LPU). An LPU installed on a pole is shown below: RADWIN 5000 Installation Guide July 2024...
  • Page 35 RADWIN 5000 Installation Guide July 2024...

  • Page 36: Connect Ground Cable

    Unit shall be permanently connected to protective earth by a skilled person using min. 14 AWG wiring. Connect a ground cable to the indicated ground connection on the radio unit JET PRO Ground: JET radio unit JET DUO Ground: JET radio unit RADWIN 5000 Installation Guide July 2024...

  • Page 37: Neo, Neo Duo, Jet-Air And Jet-Air Duo

    NEO, NEO DUO, JET-AIR and JET-AIR DUO Ground: NEO, JET AIR and JET-AIR DUO radio unit MultiSector Integrated Ground: MultiSector Integrated radio unit or Multisector antenna RADWIN 5000 Installation Guide July 2024...

  • Page 38: Multisector Connectorized

    MultiSector Connectorized Ground: MultiSector Connectorized unit SU PRO/AIR Integrated Ground: SU Integrated radio unit RADWIN 5000 Installation Guide July 2024...

  • Page 39: Su Pro/Air Connectorized

    4. Seal the connectors (See Waterproofing on page 52). Possibility of hazardous voltage 56VDC appearance exists on accessible antenna connections. Use Personal Protection Equipment (e.g. insulating gloves) when working with the unit or the antenna. RADWIN 5000 Installation Guide July 2024...

  • Page 40: Su Or Alpha Pro Connectorized

    • Sector Self-Backhaul: This feature uses one of the subscriber units as a backhaul link. That subscriber unit uses the air interface to communicate with an external antenna connected to the base station as shown below. Note that this feature must also be configured properly. See the RADWIN 5000 Configuration Guide.
  • Page 41 • The connecting ports are located on the wing of the base station opposite the wing that has the carrier. This helps to reduce complexity in RF cable routing. • The base station and antenna can be mounted anywhere it is convenient according to your radio plan. They need not be mounted back-to-back. RADWIN 5000 Installation Guide July 2024...
  • Page 42 MultiSector Base Station Integrated connected to MultiSector antenna (Carrier 1 only) MultiSector Base Station Integrated connected to MultiSector antenna (Carrier 2 only) MultiSector Base Station Integrated connected to MultiSector antenna (both Carriers) RADWIN 5000 Installation Guide July 2024...

  • Page 43: Multisector Connectorized

    For instance, if you connect the V port on the MultiSector to the port labeled 1, make sure you do that for all the connections. Antenna connection scheme for the MultiSector Connectorized unit RADWIN 5000 Installation Guide July 2024...

  • Page 44: Connect Poe Cable

    Press firmly on the port cover’s plastic latch, pull the cover out and connect POE cable • Secure the cable using the supplied cable tie • • Cut the cable tie, slide the cover onto the unit until the latch is secure RADWIN 5000 Installation Guide July 2024...

  • Page 45: Su Pro/Air Integrated Or Connectorized

    SU PRO/AIR Integrated or Connectorized 1. Connect a CAT-5e cable to the input port of the radio as shown: POE port: SU Integrated unit POE port: SU Connectorized unit (“PoE In”) RADWIN 5000 Installation Guide July 2024...

  • Page 46: Jet Duo, Jet Pro, Jet Air, Jet-Air Duo, Neo And Neo Duo

    2. SFP port can be used to connect fiber (for data only). Note that POE cable must still be used to provide power, and may also be used for management access to the unit: SFP port: JET-DUO 3/5 GHz, JET AIR, JET PRO, JET-AIR DUO and NEO DUO RADWIN 5000 Installation Guide July 2024...

  • Page 47: Multisector Integrated

    (no power). It is labeled “LAN” on the unit, and is referred to as “SFP” in the Web user interface. Note that you must still connect a CAT-5e cable to “PoE In” to provide power: SFP port: MultiSector Base Station RADWIN 5000 Installation Guide July 2024...

  • Page 48: Multisector Connectorized

    “LAN” on the unit, and is referred to as “SFP” in the Web user interface. Note that you must still connect a CAT-5e cable to “PoE” to provide power: SFP port: MultiSector Base Station Connectorized RADWIN 5000 Installation Guide July 2024...

  • Page 49: Connect Poe Device

    Connect POE device RADWIN 5000 radio units require a Power-over-Ethernet (PoE) source to supply both power and ethernet connectivity. RADWIN portfolio includes single PoE devices or IDU series switches. These devices are briefly described in this section. See POE compatibility table in Appendix A to verify compatibility between RADWIN radios and POE sources.
  • Page 50 • LAN ports: Ethernet, supporting GbE. • ODU/PoE ports: Function identically to the LAN-Out port on a PoE device. • DC Inputs • Grounding lug • LED colors: Green = link/activity, Yellow = Duplex/two-way communication RADWIN 5000 Installation Guide July 2024...
  • Page 51 These switches are compatible with most of RADWIN radios, and also support standard POE 802.3bt (up to 90W). For a full description on how to install and use IDU-S or IDU-SI, see the User Guides on Radwin Portal. RADWIN 5000 Installation Guide...

  • Page 52: Waterproofing

    1 from rain, dust, moisture and salt by taping the cable/gland connection with an appropriate sealant tape. We recommend using ScotchTM 23 splicing tape or similar. Figure 22: Sealant tape Add tape as shown below. Figure 23: Applying sealant tape to an external connection RADWIN 5000 Installation Guide July 2024...

  • Page 53: Activate Base Station

    1) Enter System parameters: Sector ID, Sector Name and Location. Click Next. 2) Select Radio parameters: operating channels and channel bandwidth. Click Next. 3) Enter Antenna and TX parameters. Click Activate. 4) Repeat the above for the 2nd carrier (if required / applicable). RADWIN 5000 Installation Guide July 2024...

  • Page 54: Activate And Align Subscriber Unit

    When using Web UI: Connect to the SU via Ethernet or WIFI (see Accessing Web UI for details) Activate transmission (click Operations -> Activate) Access Diagnostics -> RSS Monitor for accurate alignment based on real-time RSS graph RADWIN 5000 Installation Guide July 2024...

  • Page 55: Aligning Su Air, Su Pro Or Alpha-Pro Integrated

    Aligning SU AIR, SU PRO or Alpha-PRO Integrated 1. Loosen pole bracket bolts for azimuth alignment 2. Loosen ODU bolt for elevation alignment 3. Secure all bolts once alignment is done RADWIN 5000 Installation Guide July 2024...

  • Page 56: Safety Practices And Provisions

    • Use extreme care when installing antennas near power lines. • Use extreme care when working at heights. • When using an AC power source for RADWIN devices, always use the AC power adapter supplied by RADWIN. • Use the right tools! •...

  • Page 57: Emc And Safety Compliance

    EMC and Safety compliance RADWIN equipment complies with EMC and Safety standards. Please refer to WINPro datasheet of the specific model for regulation and compliance details. RADWIN 5000 Installation Guide July 2024...
  • Page 58 RADWIN 5000 Installation Guide July 2024...

  • Page 59: Appendix A. Power Over Ethernet

    JET PRO: HW ver 330J JET DUO 5+3 GHz: HW ver 113D JET AIR: HW ver 120D JET DUO 5 GHz: HW ver 311D MS HBS INT: HW ver 411M JET AIR DUO: HW ver 122D RADWIN 5000 Installation Guide July 2024...

  • Page 60: Poe Pinout For 2-Pair Poe

    A.2 POE Pinout for 2-pair POE RADWIN 24W / 35W POE units and IDU-H are using the following pinout: Function Data TxRx A Data TxRx A Data TxRx B Data TxRx B Data TxRx C & Power(+) Data TxRx C & Power(+) Data TxRx D &...

  • Page 61: Appendix B. About Antennas

    B.2.1 About Single and Dual Antennas Each RADWIN radio is actually made of two radio transceivers (radios). The radios make use of algorithms that utilize both Spatial Multiplexing (also called MIMO) and Diversity resulting in enhanced capacity, range and link availability. The number of antennas (i.e. radios) used is determined by user configuration and by automatic system decisions, explained below.

  • Page 62: Single Antennas At Both Sites

    Tx Power for the equipment, also having regard the above three points. Then, the following relationship must be satisfied: maxAvailableTxPowe r min(maxRegEIRP – AntennaGain + CableLoss max RegTxPower) ... (*) RADWIN 5000 Installation Guide July 2024...
  • Page 63 • Tx Power (system) is maxAvailableTxPower + 3 (for 2 radios) • Max EIRP is maxRegEIRP. • EIRP is maxAvailableTx Power + Antenna Gain - Cable Loss RADWIN 5000 Installation Guide July 2024...

  • Page 64: Appendix C. Terminology

    Global Navigation Satellite System (such as GPS, Glonass, etc.) GNSS High capacity Base Station. Same as a BS Hub Sync Client: When using Hub Site Synchronization, one unit is a master (generates the sync pulses), and the other units are clients. RADWIN 5000 Installation Guide July 2024...
  • Page 65 If a radio unit is installed close enough to one of these stations, the FCC requires that certain actions must be taken on the part of the customer. Regulations in other countries varies. RADWIN 5000 Installation Guide July 2024...
  • Page 66 Description Term Data traffic from an HSU to an HBS Uplink Web Interface: web-based application that provides simple configuration capabilities for the radio units. World-wide RADWIN 5000 Installation Guide July 2024...

  • Page 67: Appendix D. Certified Antennas

    16.5 35° Integrated Flat DP 23.0 8° RW-9613-4960 Flat DP 23.5 8° Integrated Flat DP 29.0 5° RW-9622-5001 Shark Fin SP 12.5 50° RW-9401-5002 Dish DP 28.0 5.5° RW-9721-5158 Dish DP 32.0 4° RW-9732-4958 RADWIN 5000 Installation Guide July 2024...
  • Page 68 Flat DP BS 12.0 95° Integrated Flat DP BS 13.0 90° Integrated Flat DP BS 14.0 90° RW-9061-5001 Flat DP BS 15.5 60° RW-9061-5002 Flat DP 16.0 35° Integrated Flat DP 16.0 35° Integrated RADWIN 5000 Installation Guide July 2024...
  • Page 69 16.0 35° Integrated Flat DP 23.0 8° RW-9613-4960 Flat DP 21.0 8° Integrated Flat DP 29.0 5° RW-9622-5001 Shark Fin SP 12.5 50° RW-9401-5002 Dish DP 28.0 5.5° RW-9721-5158 Dish DP 30.0 4° RW-9732-4958 RADWIN 5000 Installation Guide July 2024...
  • Page 70 JET PRO The RADWIN 5000 JET PRO bears the following FCC/IC IDs on the label, and refer to Table 19 to Table 22 below: FCC ID: Q3K-BFJET5XT40 IC: 5100A-BFJET5XT40 This radio transmitter “IC: 5100A-BFJET5XT40” has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated.
  • Page 71 12° Uniform 19.0 16° Sharp 11.0 85° Floodlight Table 11: Frequency Band 3650-3700 MHz Gain (dBi) Dir BW Tx Power per Min. Safe Operating Form chain (dBm) Distance (cm) 17.0 17° Uniform 70° Floodlight RADWIN 5000 Installation Guide July 2024...
  • Page 72 Distance (cm) 19.0 19° Uniform 80° Floodlight Table 13: Frequency Band 5150-5250 MHz (FCC only) Gain (dBi) Dir BW Tx Power per Min. Safe Operating Form chain (dBm) Distance (cm) 17.0 18° Uniform 80° Floodlight RADWIN 5000 Installation Guide July 2024...
  • Page 73 Table 15: Frequency Band 5150-5250 MHz (FCC Only) Type Gain (dBi) Dir BW Tx Power per Min. Safe Cat. No. chain (dBm) Distance (cm) Flat DP BS 13.0 90° Integrated Flat DP BS 14.0 90° RW-9061-5001 RADWIN 5000 Installation Guide July 2024...
  • Page 74 Tx Power per Min Safe Cat. No. chain (dBm) Distance (cm) Flat DP 30° 25.0 RW-9105-5159 Flat DP 20° 22.0 RW-9105-4958 Flat DP 10° 23.0 Integrated Flat DP 10° 22.0 RW-9613-4960 Flat DP 5° 11.0 RW-9622-5001 RADWIN 5000 Installation Guide July 2024...
  • Page 75 Table 18: Frequency Band 5250-5350 and 5470-5725 MHz Type Gain (dBi) Dir BW Tx Power per Min Safe Cat. No. chain (dBm) Distance (cm) Flat DP 30° RW-9105-5159 Flat DP 20° RW-9105-4958 Flat DP 10° Integrated Flat DP 10° RW-9613-4960 RADWIN 5000 Installation Guide July 2024...
  • Page 76 (dBm) Distance (cm) Beamforming BS 30° Integrated Table 21: Frequency Band 5725-5850 MHz Type Gain (dBi) Dir BW Tx Power per Min Safe Cat. No. chain (dBm) Distance (cm) Beamforming BS 30° Integrated RADWIN 5000 Installation Guide July 2024...

  • Page 77: For Deployment In Eu Member States

    JET PRO, JET-DUO (5.x/3.x GHz), and JET-DUO 5.x/5.x GHz The RADWIN 5000 JET PRO, JET-DUO (5.x/3.x GHz), and JET-DUO 5.x/5.x GHz must be installed so as to provide a minimum separation distance from bystanders as specified in the tables below:...
  • Page 78 Gain (dBi) Dir BW Tx Power per Min Safe Cat. No. chain (dBm) Distance (cm) Omni 360° RW-9401-5007 Flat DP 30° RW-9105-5159 Flat DP 20° RW-9105-4958 Flat DP 10° Integrated Flat DP 10° RW-9613-4960 RADWIN 5000 Installation Guide July 2024...
  • Page 79 Flat DP BS 14.0 90° 19.0 RW-9061-5001 Flat DP BS 15.0 60° 18.0 RW-9061-5002 Flat DP BS 11.0 120° 22.0 RW-9061-5004 Flat DP BS 13.0 90° 20.0 RW-9061-5010 Flat DP 16.0 20° 17.0 RW-9105-4958 RADWIN 5000 Installation Guide July 2024...
  • Page 80 Flat DP 16.0 20° 11.0 RW-9105-4958 Flat DP 19.0 17° RW-9105-5158 Flat DP 23.0 10° RW-9613-4960 Flat DP 28.0 5° -1.0 RW-9622-5001 Dish DP 28.0 5.6° -1.0 RW-9721-5158 Dish DP 32.0 4° -5.0 RW-9732-4958 RADWIN 5000 Installation Guide July 2024...

  • Page 81: Appendix E. Regulatory Compliance

    5XACMOLD Contains IC: 5100A- , 5.8 Contains FCC ID: Q3K- 5XACMODMS 5XACMODMS IC: 5100A-BFJET5X ; 4.9-5.8 94.38 FCC ID: Q3K-BFJET5X 3.6; 5.1 ; 5.8 FCC ID: Q3K-JETDB5X3X IC: 5100A-5XACULCX 2.4; 5.1 FCC ID: Q3K-5XACULC-X RADWIN 5000 Installation Guide July 2024...
  • Page 82 The installer should configure the output power level of antennas according to country regulations and antenna type. RADWIN 5000 Installation Guide July 2024...
  • Page 83 The use of any antenna other than those certified with the product is expressly forbidden by FCC rules 47 CFR part 15.204. A list of approved external antennas can be found in the Certified Antennas appendix. RADWIN 5000 Installation Guide July 2024...
  • Page 84 Outdoor units are configurable by software to Tx power values other than those for which the product is certified, it is the responsibility of the Professional Installer to restrict the Tx power to the certified limits. RADWIN 5000 Installation Guide July 2024...
  • Page 85 5725 MHz bands must comply with the EIRP limits as specified in the Certified Antennas appendix. Appareils radio utilisant des antennes externes fonctionnant dans les bandes 5250-5350 MHz et 5470-5725 MHz seront conformes ala EIRP limites iniquees à l'annexe Antennes Certifiées. RADWIN 5000 Installation Guide July 2024...
  • Page 86 Les appareils de radio dans ce manuel ont ete approuves par Industrie Canada pour fonctionner avec les types d’antenne enumeries à l'annexe Antennes Certifiées avec le gain maximal admissible et l’impedance d’antenne requise pour chaque type d’antenne indique. RADWIN 5000 Installation Guide July 2024...
  • Page 87 Canada and Mexico regarding operation in U.S./Canada and U.S./ Mexico border areas. Canadian Emission Requirements for Indoor Units This Class B digital apparatus complies with Canadian ISED-003. Cet appareil numeique de la classe B est conforme a la norme NMB-003 du Canada. RADWIN 5000 Installation Guide July 2024...
  • Page 88 All RADWIN products that operate in the 5.8 GHz band comply with the requirements of the harmonized standard ETSI EN 302 502 and the ECC RECOMMENDATION (06)04.
  • Page 89 är kopplad till kabel-TV nät kan i vissa fall medföra risk för brand. För att undvika detta skall vid anslutning av utrustningen till kabel-TV ät gal- vanisk isolator finnas mellan utrustningen och kabel-TV nätet. RADWIN 5000 Installation Guide July 2024...

  • Page 90: Safety Practices

    5. Use min. 14 AWG external protective earthing conductor. 6. Earth the antenna coax shield to the building earth or mast. RADWIN 5000 Installation Guide July 2024...

  • Page 91: Appendix F. Revision History

    • Link Quality Indication: sends a trap if the throughput of the link is below a certain threshold . • Ability to send reports to a Syslog Server. • Broadcast and Multicast flooding protection can be configured separately. RADWIN 5000 Installation Guide July 2024...
  • Page 92 • 802.1x authentication • Nomadic functionality • Utilization feature • Quality detection feature • Bridge table • DHCP (Option 82) 14. DQ0266070/A.01 System Jun, 2020 • Added certified antenna: 5250-5350 MHz and 5470-5725 MHz Release 5.0.50 RADWIN 5000 Installation Guide July 2024...
  • Page 93 • Changed document version to be independent of SW release versions 24. Document version 24 July, 2024 • Revised document structure • Removed EOL products • New Products: SU ECO and Alpha PRO • Added POE compatibility table • Content corrections RADWIN 5000 Installation Guide July 2024...

  • Page 94: Appendix G. Conditions Of Use

    RADWIN. The RADWIN name is a registered trademark of RADWIN. No right, license, or interest to such trademark is granted hereunder, and you agree that no such right, license, or interest shall be asserted by you with respect to such trademark.

This manual is also suitable for:

5000l