Table of Contents
Advertisement
Internet Server User's Guide
We recommend that you make a note of each device's IP address
for reference during troubleshooting or when adding new stations
or devices.
Using In-Band Telnet to Configure
the Server
Once your PC is configured with an IP address on the same subnet
as the server, start your Telnet program and enter the IP address
assigned to the server when you are prompted for a host address.
You should immediately see the internet server Telnet Interface
console greeting screen.
Enter the password to access the device parameters. There is no
default password. Once you have access, use the menu item num-
bers to set the variables which are described later in this chapter.
Note:
When using Telnet to modify device parame-
ters, saving those parameters immediately
ends the Telnet session.
Using a Browser to Configure the
Server
Once your PC is configured with an IP address on the same subnet
as the server, start your browser program and enter the "http://"
prefix, followed by the IP address assigned to the server, in the
address window.
14
System Setup
Advertisement
Table of Contents
