TRENDnet TW100-BRM504 User Manual page 38

Advanced Administration
Figure 51: Routing Screen
Data - Routing Screen
RIP
RIP Direction Select the desired RIP Direction.
Choose the RIP Version for the Server.
RIP Version
Static Routing
Static Routing This list shows all entries in the Routing Table.
Table Entries
•
This area shows details of the selected item in the list.
•
Change any the properties as required, then click the "Edit"
button to save the changes to the selected entry.
Buttons
Add Add a new entry to the Static Routing table, using the data shown in
the "Properties" area on screen. The entry selected in the list is
ignored, and has no effect.
Update the current Static Routing Table entry, using the data shown
Edit
in the table area on screen.
Delete Delete the current Static Routing Table entry.
Save the RIP setting. This has no effect on the Static Routing Table.
Save
Configuring Other Routers on your LAN
It is essential that all IP packets for devices not on the local LAN be passed to the Broadband
ADSL Router, so that they can be forwarded to the external LAN, WAN, or Internet. To
achieve this, the local LAN must be configured to use the Broadband ADSL Router as the
Default Route or Default Gateway.
Broadband ADSL Router User Guide
Local Router
The local router is the Router installed on the same LAN segment as the Broadband ADSL
Router. This router requires that the Default Route is the Broadband ADSL Router itself.
Typically, routers have a special entry for the Default Route. It should be configured as follows.
Destination IP Address
Network Mask
Gateway IP Address
Metric
Other Routers on the Local LAN
Other routers on the local LAN must use the Broadband ADSL Router's Local Router as the
Default Route. The entries will be the same as the Broadband ADSL Router's local router, with
the exception of the Gateway IP Address.
•
For a router with a direct connection to the Broadband ADSL Router's local Router, the
Gateway IP Address is the address of the Broadband ADSL Router's local router.
•
For routers which must forward packets to another router before reaching the Broadband
ADSL Router's local router, the Gateway IP Address is the address of the intermediate
router.
Static Routing - Example
For the Broadband ADSL Router's Routing Table
For the LAN shown above, with 2 routers and 3 LAN segments, the Broadband ADSL Router
requires 2 entries as follows.
Entry 1 (Segment 1)
Destination IP Address
Network Mask
Gateway IP Address
71
Normally 0.0.0.0, but check your router documentation.
Normally 0.0.0.0, but check your router documentation.
The IP Address of the Broadband ADSL Router.
1
Figure 52: Routing Example
192.168.1.0
255.255.255.0 (Standard Class C)
192.168.0.100 (Broadband ADSL Router's
72