TRENDnet TW100-BRM504 User Manual page 14

PC Configuration
Checking TCP/IP Settings - Windows NT4.0
1. Select Control Panel - Network, and, on the Protocols tab, select the TCP/IP protocol, as
shown below.
Figure 18: Windows NT4.0 - TCP/IP
2. Click the Properties button to see a screen like the one below.
Broadband ADSL Router User Guide
3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify
an IP Address, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this is recommended. By default, the Broadband
ADSL Router will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the Broadband ADSL Router.
Specify an IP Address
If your PC is already configured, check with your network administrator before making the
following changes.
1. The Default Gateway must be set to the IP address of the Broadband ADSL Router. To set
this:
•
Click the Advanced button on the screen above.
•
On the following screen, click the Add button in the Gateways panel, and enter the
Broadband ADSL Router's IP address, as shown in Figure 20 below.
•
If necessary, use the Up button to make the Broadband ADSL Router the first entry in
the Gateways list.
23
Figure 19: Windows NT4.0 - IP Address
24