TRENDnet TV-IP200W User Manual page 48

There are two options to select from the Trigger screen I/O Input
1 Trigger and I/O Input 2 Trigger.
I/O Input 1 Trigger:
Select "Send e-mail attached with image" and enter the relevant
information such as the SMTP Server Address, Sender e -mail
Address, Receiver e-mail Address, Sending Interval and Sending
Times.
SMTP (Simple Mail Transfer Protocol) is a protocol for
sending e-mail messages between servers you need to
input the mail server address in this field.
Sender e-mail is the person's e-mail address whom will
be sending the e-mail.
Receiver e-mail is the e-mail address of the person
whom will receive the e-mail.
Sending Interval is the period of time between each e -
mail being sent to the receiver. If the setting is at 10
seconds, a new e-mail will be sent in 10 seconds interval
to the receiver.
Sending Time is the number of times the e-mail will be
sent to the receiver before it terminates.
Select "Trigger I/O Output" and enter the setting for the
duration of the output device for Output 1 time and Output 2 time
in seconds.
I/O Input 2 Trigger:
Select "Send e-mail attached with image" and enter the relevant
information such as the SMPT Server Address, Sender e -mail
Address, Receiver e-mail Address, Sending Interval and Sending
Times.
47