TRENDnet TV-IP200W User Manual page 112

Q: What network cabling is required for the Wireless Internet
Camera?
A: The Wireless Internet Camera uses Category 5 UTP cable
allowing 10 Base-T and 100 Base-T networking.
Q: Can the Wireless Internet Camera be setup as a PC-cam on
the computer?
A: No, the Wireless Internet Camera is an Internet Camera used
only on Ethernet and Fast Ethernet network and supported by
wireless transmission.
Q: Can the Wireless Internet Camera be connected on the
network if it consists of only private IP addresses?
A: The Wireless Internet Camera can be connected to LAN with
private IP addresses.
Q: Can the Wireless Internet Camera be installed and work if a
firewall exists on the network?
A: If a firewall exists on the network, port 80 is open for
ordinary data communication. However, since the Wireless
Internet Camera transmits image data, the default port 8481 is
also required. Therefore, it is necessary to open port 8481 of the
network for remote users to access the Wireless Internet Camera.
111