Note:
You can further adjust the Wireless Internet Camera's image
quality
through
Administration - Image. Please refer to Web Configuration
section for further details.
Direct exposure to sunlight may cause permanent damage to the
CMOS sensor. Therefore do not expose the Internet Camera's lens
directly to sunlight. When operation is required in glaring light
environment, it is recommended to use an iris lens.
The Internet Camera is designed for indoor usage and if your
application requires prolong exposure to sunlight, a sun visor is
recommended to protect the Internet Camera.
Replacing the Lens
Since the Wireless Internet Camera is designed with a CS- mount,
the lens equipped with the Wireless Internet Camera can be
replaced with any standard C or CS lens commonly used within
the surveillance industry.
Follow the instructions below to replace the supplied lens with
any C or CS type lens.
1. Unscrew the Wireless Internet Camera lens
2. C-lens only, attach the new lens to a CS-C adapter
the
Web
Configuration
Warning
129
under
System