Advertisement
Table of Contents
BFSJ-2748; CJ-BEAM; H-LO-J-BEAM; LO-J; SJ; SP-TOP-R
BFSJ
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine if
it sustained damage during transport. If damage is discovered, record a complete description of it on
the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department
can also be contacted online at https://www.vestil.com/page-parts-request.php.
Electronic copies of Instruction Manuals
Additional
copies
https://www.vestil.com/page-manuals.php.
Specifications........................................................................................................................
Capacities by
Model.............................................................................................................
Signal
Words............................................................................................................................ 2
Safety
Instructions....................................................................................................................
BFSJ-2748
&
CJ-BEAM Exploded Views & Bills of
H-LO-J-BEAM Exploded View & Bill of
HI-J, LO-J,
&
LO-J-BEAM Exploded Views & Bills of
SJ Exploded View & Bill of
SP-TOP
&
SP-TOP-R Exploded Views & Bills of
SP-TOP-BEAM Exploded Views & Bills of
Using a Stabilizing
Jack............................................................................................................. 5 Inspections &
Record of Satisfactory
Inspecting and Maintaining the Stabilizing
Labeling
Diagram....................................................................................................................
Limited
Warranty.....................................................................................................................
Table of Contents
rev. 8/14/2024
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
TRAILER STABILIZING JACKS
CJ-BEAM
LO-J-BEAM
of
this
instruction
Table of Contents
Materials........................................................................
Materials.......................................................................................
Materials...............................................................
Materials......................................................................
Condition............................................................................................
Jack.........................................................................
Copyright 2024 Vestil Manufacturing Co.
VESTIL MANUFACTURING CO.
Fax: (260) 665-1339
www.vestil.com
LO-J & HI-J
manual
may
Materials...........................................................
Materials........................................................
Stabilizing Jacks, MANUAL
info@vestil.com
SJ
SP-TOP
be
downloaded
Page 1 of 15
from
Page
2
2
2
2
2
3
3
4
4
5
6
7
8
9
10 - 12
12
12 - 13
6
14
7
15
Advertisement
Table of Contents
Related Manuals for Vestil BFSJ-2748
Summary of Contents for Vestil BFSJ-2748
- Page 1 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestil.com info@vestil.com TRAILER STABILIZING JACKS BFSJ-2748; CJ-BEAM; H-LO-J-BEAM; LO-J; SJ; SP-TOP-R BFSJ CJ-BEAM LO-J-BEAM LO-J & HI-J SP-TOP Receiving Instructions After delivery, remove the packaging from the product.
-
Page 2: Specifications
I. SPECIFICATIONS Documents that provide specifications for each model of trailer stabilizing jack are available online to anyone who visits Vestil’s website. Specifications include dimensions, net weight, and capacity information. Navigate to https://www.vestil.com/product.php?FID=90. Scroll to the Product Specifications Table portion of the page. Find the entry for the jack you purchased and click the button in the “PDF”... -
Page 3: Signal Words
III. SAFETY INSTRUCTIONS Vestil strives to identify foreseeable hazards associated with the use of its products. However, no manual can address every conceivable risk. To minimize the likelihood of being injured as a result of using this device, inspect and maintain the product as instructed in INSPECTIONS &... - Page 4 Table of Contents rev. 8/14/2024 Stabilizing Jacks, MANUAL IV. EXPLODED VIEWS & BILLS OF MATERIALS BFSJ-2748 & BFSJ-2748-100 EXPLODED VIEW AND BILL OF MATERIALS 13-006-002 Ratchet socket Item Part no. Description Qty. FRAME, WELDMENT 13-514-007 BFSJ-2748 13-514-044 BFSJ-2748-100 13-112-001 PIN, AXLE 13-525-001 HANDLE ASS'Y WHEEL, Ø10"...
- Page 5 33008 3/8" NYLON INSERT LOCK NUT, GRADE 2, ZINC FINISH, 37024 3/8"-16 65077 COTTER PIN, ZINC PLATED, 1/8" X 1-1/4" 33012 FLAT WASHER, LOW CARBON, ZINC FINISH, 1/2" Table of Contents Copyright 2024 Vestil Manufacturing Co. Page 5 of 15...
- Page 6 COTTER PIN, ZINC 65077 PLATED, 1/8" X 1-1/4" 13-525-001 HANDLE ASS'Y 4 X 1-1/4 SEMI STEEL 16-132-007 WHEEL (3/8" PLAIN BORE) WHEEL, Ø10" x 2 1/2", 16-132-287 13mm STEEL HUB Table of Contents Copyright 2024 Vestil Manufacturing Co. Page 6 of 15...
- Page 7 13-025-043 HANDLE/GRIP/KNOB 13-112-006 PIN, 8" WHEEL SPECIALTY HARDWARE, SNAP HOOK, 08-145-008 Ø1/4 16-132-254 WHEEL, 8" HARD RUBBER 33010 WASHER, FLAT COTTER PIN, ZINC PLATED, 1/8" X 1- 65077 1/4" Table of Contents Copyright 2024 Vestil Manufacturing Co. Page 7 of 15...
- Page 8 WHEEL, Ø10" x 2 1/2", 13mm STEEL 16-132-287 WELDMENT, FRAME 13-514-001 SP-TOP-R 13-514-019 SP-TOP-R-100 13-525-001 HANDLE ASS'Y FLAT WASHER, LOW CARBON, 33012 ZINC FINISH, 1/2" COTTER PIN, ZINC PLATED, 1/8" X 65077 1-1/4" Table of Contents Copyright 2024 Vestil Manufacturing Co. Page 8 of 15...
- Page 9 CARBON, USS, ZINC PLATED, 3/8" FLAT WASHER, LOW 33012 CARBON, ZINC FINISH, 1/2" HEX NUT, GRADE A, ZINC 36106 PLATED, 3/8-16 COTTER PIN, ZINC 65077 PLATED, 1/8" X 1-1/4" Table of Contents Copyright 2024 Vestil Manufacturing Co. Page 9 of 15...
- Page 10 NEVER use a stabilizing jack unless it is oriented perpendicularly to the underside of the trailer. Vestil recommends that stabilizing jacks be used in pairs. Best practice is to deploy pairs of jacks symmetrically about the centerline (long axis) of the trailer. For example, arrange a pair of jacks with 1 jack under each corner of the same end of the trailer.
- Page 11 Valve must be closed in Insert wider end of handle into handle order to extend the cylinder receiver; move handle up-&-down. and raise the top cap. Table of Contents Copyright 2024 Vestil Manufacturing Co. Page 11 of 15...
- Page 12 RECORD OF SATISFACTORY CONDITION (the “RECORD”). Do not use the jack unless all parts are in satisfactory condition. Replace parts that are not in satisfactory condition before using the Table of Contents Copyright 2024 Vestil Manufacturing Co. Page 12 of 15...
- Page 13 LABELING DIAGRAM on p. 14): the jack should be labeled at all times as shown in the diagram. Replace any label that is damaged or not easily readable. Table of Contents Copyright 2024 Vestil Manufacturing Co. Page 13 of 15...
-
Page 14: Labeling Diagram
(260) 665-7586 and asking the operator to connect you to the PARTS DEPARTMENT. A: Label 233, 234, or 265 B: Label 252 (Red, reflective) Table of Contents Copyright 2024 Vestil Manufacturing Co. Page 14 of 15... - Page 15 After Vestil receives your request for warranty service, an authorized representative will contact you to determine whether your claim is covered by the warranty. Before providing warranty service, Vestil will require you to send the entire product, or just the defective part (or parts), to its facility in Angola, IN.
Need help?
Do you have a question about the BFSJ-2748 and is the answer not in the manual?
Questions and answers