Download Print this page

Vestil CJ-BEAM Instruction Manual

Trailer stabilizing jacks
Hide thumbs Also See for CJ-BEAM:

Advertisement

Quick Links

Rev. 11/8/2016
Receiving instructions:
After delivery, remove the packaging from the product. Then, inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered, record a complete description of the damage on
the bill of lading. If the product is undamaged, discard the packaging.
Notes:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product
is used is exclusively the responsibility of the end-user.
2) VESTIL is not responsible for injury or property damage that results from failure to apply either instructions in this
manual, or information provided on product labels.

Table of Contents:

Signal Words.......................................................................................................................................... 2
Safe Use Recommendations...................................................................................................................... 2
Specifications......................................................................................................................................... 3
FIG. 1: Exploded parts diagram & bill of materials.......................................................................................... 4
Using the jack........................................................................................................................................ 4
Installation of optional foam-filled wheels..................................................................................................... 5
Inspections & Maintenance....................................................................................................................... 6
Labeling Diagram................................................................................................................................... 6
Limited Warranty..................................................................................................................................... 7
Copyright 2016 Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
www.vestilmfg.com
CJ-BEAM Trailer Stabilizing Jacks
Instruction Manual
Vestil Manufacturing Corp.
Fax: (260) 665-1339
e-mail:
CJ-BEAM, MANUAL
sales@vestil.com
Page 1 of 7

Advertisement

loading

Summary of Contents for Vestil CJ-BEAM

  • Page 1: Table Of Contents

    1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product is used is exclusively the responsibility of the end-user. 2) VESTIL is not responsible for injury or property damage that results from failure to apply either instructions in this manual, or information provided on product labels.
  • Page 2: Signal Words

    Safe Use Recommendations: Vestil strives to identify foreseeable hazards associated with the use of its products. However, material handling is dangerous and no manual can address every conceivable risk. The most effective way to avoid end-user ultimately is responsible for exercising sound judgment at all times.
  • Page 3: Specifications

    Rev. 11/8/2016 CJ-BEAM, MANUAL Specifications: Dimensions and other specifications for each CJ-BEAM model jack appear in the diagrams below. CJ-BEAM-PN: Static capacity = 100,000 lb. Lifting capacity = 50,000 lb. Overall width = 29 ” Overall length = 27 ”...
  • Page 4: Using The Jack

    To adjust the height of the jack, simply turn the crank handle clockwise. CJ-BEAM model jacks have 2 raising/lowering speeds. To operate in high speed mode, pull the crank handle toward you to extend the crank shaft.
  • Page 5: Installation Of Optional Foam-Filled Wheels

    Wheel to prevent wobble. Axle Cotter Insert cotter pin through closest accessible pin hole to wheel to minimize back- and-forth movement of axle. Copyright 2016 Vestil Manufacturing Corp. Page 5 of 7...
  • Page 6: Inspections & Maintenance

    The jack should be labeled at all times as shown in the diagram below. Periodically clean the labels to maintain legibility. Replace any label that is damaged and/or not easily readable. A: Label 252 B: Label 265 Copyright 2016 Vestil Manufacturing Corp. Page 6 of 7...
  • Page 7: Limited Warranty

    (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.