1. Before You Start Package Contents TU3-S35 Multi-Language Quick Installation Guide CD-ROM (User’s Guide) USB 3.0 Type A to Type B Cable (1.8m/6ft) Power Cord Power Adapter (12V DC, 2A) Hard Drive Mounting Screws Mounting Stand System Requirements USB Port: 3.0, 2.0, 1.1 SATA I/II internal hard drive CD-ROM drive Phillips screwdriver...
2. Hardware Installation 1. Unscrew and remove the device cover. 2. Connect the SATA data cable and power connector into the SATA hard drive. 3. Use the provided screws to secure the hard drive to the TU3-S35.
Page 5
4. Slide the cover back on and secure it with the 4 screws. 5. Connect the power adapter to the TU3-S35. 6. Insert the power cord into the AC Power Adapter and then to a power outlet. 7. Connect the Type B end of the provided USB cable into the TU3-S35.
Page 6
8. Connect the Type A end of the provided USB cable into an available USB port on your computer. 9. Move the power switch to the on position. 10. Drivers will install automatically. Note: It is recommended that you format a brand new hard drive first. Please refer to question 2 in the troubleshooting section for more information.
Hard Disk Drives. Your storage device is ready for access For detailed information regarding the TU3-S35 configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the CD-ROM, or TRENDnet's website at http://www.trendnet.com. Register Your Product To ensure the highest level of customer service and support, please take a moment to www.trendnet.com/register...
MassStorage USB Device is listed. 2. If you are attaching a brand new hard drive, format the drive. Please refer to question 2 for more information. If you still encounter problems or have any questions regarding the TU3-S35, please contact TRENDnet's Technical Support Department.