Subscribe to Our Youtube Channel
Related Manuals for Smeg WDN854SLDSG
Summary of Contents for Smeg WDN854SLDSG
- Page 1 WDN854SLDSG Washer-Dryer User’s Manual Document Number : 7100081300/ EN/ / 15/02/2024 14:53...
- Page 2 Please read this user manual first! Dear Customer, Thank you for choosing Smeg product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
-
Page 3: Table Of Contents
Temperature Selection ....28 Table of Contents Spin Speed Selection..... 29 1 Safety Instructions......Drying Programmes....... 30 Intended Use........Washing and Drying Programmes 30 Safety of Children, Vulnerable 6.10 Programme and Consumption Persons and Pets ......Table ..........Electrical Safety......6.11 Auxiliary Function Selection.. -
Page 4: Safety Instructions
1 Safety Instructions This section includes the safety – Personnel kitchens of stores, instructions necessary to pre- offices and other work envir- vent the risk of personal injury or onments; material damage. – Ranches, Our company shall not be held –... -
Page 5: Electrical Safety
• Use child lock to prevent chil- nected to a circuit that is regu- dren from intervening with the larly switched on and off by a product. device. • Do not forget to close the load- • Do not tuck the power cord un- ing door when leaving the der the product or to the rear room where the product is loc-... -
Page 6: Handling Safety
• Make sure the plug is not wet, Installation Safety dirty or dusty. • Check the information on the • Never connect your product to manual and installation in- electricity saving devices. Such structions to prepare the systems are harmful to the product for installation and product. - Page 7 • Do not install or leave the • Use the new hose set provided product at locations where it with the product. Do not re-use may be exposed to external en- old hose sets. Do not make ad- vironment conditions. ditions to the hoses.
-
Page 8: Operational Safety
• There is a risk of contact with top of or near the product. Do electrical pieces when the up- not put inflammable/explosive per trays is removed. Do not materials near the product. dismantle the upper tray of the • Do not get on the product. product. -
Page 9: Drying Safety
• Do not place your hands into 3. Break the locking mechanism the rotating drum. Wait until of the loading door to render the drum no longer rotates. it inoperable. • If washing laundry at high tem- 4. Do not allow children to play peratures, the discharged with the outdated product. - Page 10 are filled and damaged (e.g. • Avoid interrupting the drying Pillows or coats). There is a program by stopping your risk of burns. tumble dryer prematurely, as • If you use a laundry ball, deter- the laundry inside the machine gent scale, laundry cage or ball may become excessively hot in in your machine, these...
-
Page 11: Maintenance And Cleaning Safety
• In your washer-dryer, you can • Do not dry silk, wool and sim- only wash laundry, only dry ilar delicate clothes in the ma- laundry or do both of these chine. Otherwise, wool clothes processes. The machine can shrink and damage may should not be used for a long be caused in other delicate period of time only for drying... -
Page 12: Important Instructions For Environment
• Do not put hands, feet and • Cleaning agents containing metal objects under or behind solvents might reek poisonous your product. This can cause fumes( for ex. cleaning jams, and any sharp edge can solvent. Do not use cleaning cause personal injury. -
Page 13: Technical Specifications
3 Technical Specifications Manufacturer’s name or commercial brand SMEG WDN854SLDSG Model name 7100081300 Rated washing capacity (cotton) (kg) Rated drying capacity (cotton) (kg) Maximum spin speed (cycle/min) 1400 Built-In Height (cm) 84,5 Width (cm) Depth (cm) Single Water inlet / Double Water inlet... -
Page 14: Installation
4 Installation • Do not install the product at places where Please read the “Safety Instruc- temperature may fall below 0 ºC. Freez- tions” section first! ing might damage your product. • Leave a minimum space of 1 cm Your washing machine automatic- between the product and the furniture. -
Page 15: Removing Transportation Safety Bolts
Cover B WARNING Keep the transportation safety bolts in a safe place to reuse when the product needs to be moved again in the future. Install the transportation safety bolts in reverse order of the disas- sembly procedure. Never move the product without the transportation safety bolts properly Rest the tabs of Cover B against the lower fixed in place. -
Page 16: Connecting The Drain Hose To The
WARNING Make sure that the cold water con- nection is performed correctly dur- ing the installation of the product. Otherwise, your laundry may come out as hot at the end of the wash- ing cycle and thus they may be worn. -
Page 17: Adjusting The Stands
4.6 Adjusting the Stands • If the current supply to the fuse or breaker in the house is less than 13 Amps, have a qualified electrician install WARNING a 13 amp supply. In order to ensure that the product • The voltage specified in the "Technical operates more silently and vibra- specifications"... -
Page 18: Preliminary Preparation
2. Disconnect the water outlet and water Never carry the product without the main connections. 3 Drain all the water shipping bolts properly attached! that remains in the product. See Drain- Your product is so heavy that it ing Remaining Water and Cleaning the shall not be carried by one person. -
Page 19: Tips For Energy And Water Saving
5.3 Tips for Energy and Water Sav- 5.5 Loading the Laundry 1. Open the loading door. Following information will help you use the 2. Put the laundry items into the product in product in an ecological and energy/water- a loose manner. efficient manner. -
Page 20: Using Detergent And Softener
) there is a liquid detergent apparatus The loading door is locked while a for liquid detergent use in the main wash- programme is running. The door ing compartment. lock will open once the programme is completed. If the inner part of the Detergent, Softener and Other Cleaning machine is very hot at the end of Agents... - Page 21 • Please review the programme descrip- • Clean with water at its place or by remov- tions part for suggested programme for ing from its place when it is necessary. different textiles. Do not forget to place the apparatus in •...
-
Page 22: Tips For Efficient Washing
• Wipe the inside of the product with a • As bleach may cause skin irritation use damp and clean cloth after using starch. only small amounts (1/2 tea cups - ap- proximately 50 ml and rinse the laundry Using Anti-Limescale well. - Page 23 Powder and liquid deter- It may be necessary to gents recommended for pre-treat the stains or per- colours can be used at form prewash. dosages recommended Prefer liquid deter- Liquid detergents Powder and liquid deter- for heavily soiled gents produced suitable for colours gents recommended for clothes.
-
Page 24: Tips For Efficient Drying
5.9 Tips for Efficient Drying Programmes Washing and Cotton Dry Synthetic Dry Babyprotect+ Wash & Wear Drying It washes and It washes and Clothes such Sheets, bed- dries consecut- dries consecut- as shirts, t- dings, baby ively! Sheets, ively! Sheets, shirts, sweat- clothes, t- beddings, baby... -
Page 25: Operating The Product
starts, in 20-25 minutes actual load is de- programme duration increased automatic- tected by the machine. And if the detected ally. You can follow this change on the dis- load is higher than half load; washing pro- play. gramme will be adjusted accordingly and 6 Operating the Product Please read the “Safety Instruc- tions”... -
Page 26: Symbols On The Display
6.2 Symbols on the Display 1 Temperature Indicator 2 Door Lock Engaged Indicator 3 Drying Level Indicators 4 Programme Tracking Indicators 5 Duration Information 6 Programme Start Indicator 7 Delayed Start Enabled Indicator 8 Child Lock Engaged Indicator 9 Auxiliary Function Indicators 5 10 Auxiliary Function Indicators 4 11 Auxiliary Function Indicator 1 12 Auxiliary Function Indicators 3... -
Page 27: Washing Programmes
Programmes are limited to the Symbols shown on the display are highest spin speed appropriate for schematic and may not match with that particular type of fabric. the product one-to-one. When selecting a programme, al- If you do not want to perform dry- ways consider the type of fabric, ing process after the programme colour, soiling level and permissible... -
Page 28: Temperature Selection
be washable at 40 °C or 60 °C in a single reduce the wrinkles on your shirts. When cycle and dries them so that they can be the quick wash function is selected, the put in a cupboard immediately. Pre-treatment algorithm is executed. •... -
Page 29: Spin Speed Selection
Press the Temperature Adjustment button 1. Adjust the Spin Speed. to change the temperature. Temperature 2. Press Start/Pause button. The pro- decreases gradually. gramme will resume. Machine drains the water and spins the laundry. No change can be made in pro- If you want to drain the water at the end of grammes where temperature ad- the programme without spinning, use No... -
Page 30: Drying Programmes
6.8 Drying Programmes When you will dry laundry consist- ing of towels and bathrobes only, WARNING load a maximum of 4 kilograms of The machine automatically cleans laundry. the lint that from the laundry during For the dry weight of the laundry, drying programme. -
Page 31: Programme And Consumption Table
• Anti Allergy Clean and Wear programme is de- signed to quickly wash and dry A steam step applied at the beginning of daily clothes that have been worn the program helps to soften the dirt. for a short time and are not heavily Use this programme to wash and quickly contaminated. - Page 32 Please read Installation section of You can see the washing duration the user manual before first use. on the display of your machine The auxiliary functions in the table while selecting a programme. De- may vary according to the model of pending on the amount of laundry your machine.
-
Page 33: Auxiliary Function Selection
6.11 Auxiliary Function Selection If the selected wetness level (Iron Dry, Cupboard Dry, Cupboard Extra Dry) cannot be reached at the end of the drying programme, your ma- chine automatically extends the programme duration. The pro- gramme takes longer. If Timed Drying is selected, the pro- Select the desired auxiliary functions be- gramme finishes at the end of the fore starting the programme. -
Page 34: Functions/Programmes Selec- Ted By Pressing The Function Keys For 3 Seconds
clothes/laundry. When you press the same 6.11.2 Functions/Programmes Se- button a second time, the fast LED will light lected by Pressing the Func- up, the time will decrease a little and it will tion Keys for 3 Seconds show the minimum programme duration, which is suitable for your less soiled laun- •... -
Page 35: Drying Steps
plete. If the function is not cancelled, it will Extra Dry be active in the subsequent washing cycles Drying is performed until the Cupboard Ex- as well. tra Dry step is reached at the drying level. • Child Lock The dryness level may vary depend- Use Child Lock function to prevent children ing on the laundry mixing and ma- from tampering with the machine. -
Page 36: Starting The Programme
Programme duration may differ When you have activated the End from the values in section "Pro- Time function, do not add liquid de- gramme and consumption table" tergent in the powder detergent depending on the water pressure, compartment no 2. There is the risk water hardness and temperature, of staining of the clothes ambient temperature, amount and... -
Page 37: Loading Door Lock
4. If the loading door does not open then If no programme is started or no repeat the previous step. button is pressed within 10 minutes during programme selection pro- cess, the product will automatically turn off. Display and all indicators turn off. -
Page 38: Cancelling The Programme
6.17 Cancelling the Programme When the machine is turn on and off the programme gets cancelled. Press and hold On/Off button for 3 seconds. Changing the programme selection after programme has started: Programme cannot be changed when a programme is running. You need to pause the operating programme if the Child Lock is not active and select a new programme. -
Page 39: Cleaning The Loading Door And The Drum
1. Press the marked part of the syphon We recommend you to wipe the door gas- within the softener compartment and ket with a dry and clean cloth at the end of then pull the drawer towards yourself to the programme. This will remove residues take it out. -
Page 40: Draining Remaining Water And Cleaning The Pump Filter
7.5 Draining Remaining Water and 2. Open the filter cover. Cleaning the Pump Filter The filter system in your product prevents solid items such as buttons, coins and fab- ric fibres clogging the pump impeller during draining of washing water. Thus, the water will be drained without any problem and the service life of the pump will extend. - Page 41 • It may be difficult to close the loading • Excessive laundry is loaded in the door in case of excessive loading. >>> product. >>> Take out some of the laun- Reduce the amount of laundry and make dry from the product or distribute the sure that the loading door is closed prop- load by hand to balance it homogen- erly.
- Page 42 Washing takes longer than specified in Programme duration does not count- the user manual. (*) down. (*) • Water pressure is low. >>> Product waits • There is unbalanced load in the product. until taking in adequate amount of water >>>...
- Page 43 Washing performance is poor: Stains Washing machine does not rinse well. persist or the laundry is not whitened. • The amount, brand and storage condi- (**) tions of the detergent used are inappro- • Insufficient amount of detergent is used. priate.
- Page 44 • Detergent was mixed with the softener. • Detergent was stored under improper >>> Do not mix the softener with deter- conditions. >>> Store detergent in a gent. Wash and clean the drawer with hot closed and dry location. Do not store in water.
- Page 45 • The machine might have been over- the product and to its surrounding environ- loaded. >>> Do not overload the machine. ment. Laundry should be rearranged and re- • Spinning might not be sufficient for laun- spun. dry. >>> Select a higher spin speed in the (**) Regular drum cleaning is not applied.
- Page 48 The original spare parts for some specific components are available for 10 years from the placing on the market of the last unit of the model. Visit our website to: Get usage advice, download user manuals, get service and repair information www.smeg.com/services/customer-service...
Need help?
Do you have a question about the WDN854SLDSG and is the answer not in the manual?
Questions and answers