Advertisement
2. How to Install
Powerline Networking Solution
500Mbps Powerline AV Adapter Kit
Gigabit
Powerline
The example diagram shows a typical powerline network configuration in a home
environment with 3 powerline adapters installed in different rooms. The orange line
represents the powerline connectivity established through your home's electrical system
and the blue lines represent Cat. 5, 5e, 6 Ethernet connectivity to your network enabled
appliances such as a computer, router, or IP set top box connected to your television.
Note:
1. DO NOT install the TPL-402E until instructed to do so.
2. DO NOT plug the TPL-402E into a surge protector or power strip.
3. Avoid connecting the TPL-402E into an outlet that has appliances (e.g. refrigerators,
washer and dryer) plugged in.
4. In order for the TPL-402E adapters to link to each other, each unit must be on the
same electrical system.
5. It is not recommended to use this product on electrical systems that use AFCI circuit
breakers or plugged into GFI protected outlets as this may cause performance
degradation or loss in connectivity.
6. A maximum of 16 TPL-402E can be networked
7. Assuming that the TPL-402E adapters are configured with the default settings, to
create a powerline network, simply connect all TPL-402E adapters to wall outlets that
are on the same electrical system. No additional configuration in the utility is necessary.
8. The network name must be the same on all powerline adapters in order to establish
connectivity. If the network name is not the same on all powerline adapters, the
adapters will NOT establish connectivity. The default network name for the TPL-402E
is "HomePlugAV".
(TPL-402E)
Internet
2
Advertisement
