Scott Aerator 14035 Manual

Download this manual

Boilermaker assembly instructions r3.indd 1

The Scott Aerator Awesome Warranty

All standard Scott Aerator products are unconditionally

warranted for five years against motor defects in materials

or workmanship, under normal operating conditions. All

other product components are warranted for one year from

date of purchase. Scott Aerator will repair or replace failed

parts under warranty when the defective unit is returned

to the factory, shipping prepaid, and factory inspection

establishes that the part was defective. The unit must be

returned to the factory prior to shipment of replacement

parts. All parts replaced under this warranty will be returned

with shipping prepaid. Scott Aerator will not be liable for

consequential damage nor for any costs associated with

removal or attempts to repair components in the field.

13245 Barry Street, Holland, MI 49424

scottaerator.com

information@scottaerator.com

800-WATER-45 (800-928-3745)

(616) 392-8882

9/30/20 3:56 PM

Need help?

Do you have a question about the 14035 and is the answer not in the manual?

Page 1 All other product components are warranted for one year from date of purchase. Scott Aerator will repair or replace failed parts under warranty when the defective unit is returned to the factory, shipping prepaid, and factory inspection establishes that the part was defective.
Page 2 Boilermaker Aerator We at Scott Aerator thank you for your purchase. It is our goal to ensure that you are completely satisfied with your new Boilermaker Aerator and that it continues to operate smoothly for many years to come. Please take a few moments to read through this document for proper assembly, installation and maintenance to maximize the operating life of the unit.
Page 3 Assembly Instructions 1. Remove the two stainless-steel bolts from the float. (Fig. 1) 2. Place your Boilermaker on end, propeller side facing up. Slip the float over the Boilermaker up to the attached eyebolts. Use the pre-drilled holes to fasten the float to the Boilermaker, using the two stainless-steel bolts. (Fig. 2) 3.
Page 4 Boilermaker unit down with high pressure water. After cleaning, a visual inspection of the entire unit is recommended to be certain nothing is restricting water flow. The Scott Aerator Company has engineered all of its water features to eliminate the need for time consuming and costly winterizing products and procedures.

14030