Page 1
Aquasweep Maintain a Healthy Aquatic Environment • Dock Mount • Oscillator • Freestanding • Floating...
Page 2
We at Scott Aerator thank you for your purchase. It is our goal to ensure you are completely satisfied with your new AquaSweep and it continues to operate smoothly for many years to come. Please take a few moments to read through this document for proper assembly, installation and maintenance to maximize the operating life of the unit.
The AquaSweep has been engineered to be operated all year or unplugged and left installed throughout the winter. If the AquaSweep is ever removed from the lake or pond, it is essential to store with pump submerged in a 5 gallon...
Page 4
Adjust raising or lowering the AquaSweep. provided. Fig. 5 the AquaSweep housing 90° to the Please note, the 2 thumb screws 6. Finally, power can be supplied yoke and tighten bolt. Fig. 1...
Page 5
(Dock Mount Aquasweep Only) Our fully programmable oscillator attachment makes moving muck even easier. No need to turn the AquaSweep in its mounting; the oscillator does it for you! We pre-program the oscillator to rotate the AquaSweep in 20 degree increments every 20 minutes;...
Page 6
Freestanding Aquasweep Assembly and Installation Determine location that will best position the Aquasweep to clear debris, in a minimum water depth of 12". Adjust depth 4" from lake bottom. See back page for additional guidelines. Ground should be solid enough to ensure stable pole mounting.
Page 7
Floating Aquasweep Assembly and Installation A great solution for extending Aquasweep performance beyond the dock or in greater depths. 1. Remove hex cap bolt, washer and top hole in the float bracket. Draw rope. Secure rope ends as low as locking nut from the float bracket.
Page 8
The unit must be returned to the factory prior to shipment of replacement parts. All parts replaced under this warranty will be returned with shipping prepaid. Scott Aerator will not be liable for consequential damage nor for any costs associated with removal or attempts to repair components in the field.
Need help?
Do you have a question about the Aquasweep and is the answer not in the manual?
Questions and answers
Blinking status light