Connection Alternative - Direct Ethernet Connection; Connection Alternative - Hotspot Only; 3D Scanning; Product Information - Matter and Form THREE Quick Start Manual

English

Connection Alternative - Direct Ethernet Connection

1. Connect an ethernet cable (not included) to the 3D scanner and to your computer's
ethernet port.
2. Once connected, open the IP address projected by the 3D scanner. You may choose to
connect the 3D scanner to WIFI as per the instructions above. Please Note, this may not
work for all devices.

Connection Alternative - Hotspot Only

You may optionally use the 3D scanner by connecting to its hotspot and not connecting it to
WIFI. This configuration is not recommended because you will not have internet access on
your computer and THREE will not have internet access to check for software updates.
1. Connect your computer to the THREE's WIFI hotspot MAF_THREE.
2. Use a web-browser to open the projected IP address.
3. When prompted choose not to connect to WIFI.

3D Scanning

Once connected to the 3D scanner follow the built-in tutorial instructions to scan, process
and export.

Product Information

Please read the "Important Product Information" booklet for safety and warranty information.
7 7