TRENDnet TPE-101I Quick Installation Manual page 6

Power over ethernet injector/power over ethernet splitter

Hide thumbs Also See for TPE-101I:

Using the TPE-102S with a non-PoE device

Note: Take note of the output power for your non-PoE device. The TPE-102S

only supports non-PoE devices with an output power of 5V, 7.5V, 9V or 12V.

1. Select the proper voltage (5V, 7.5V,

9V or 12V).

2. Connect an Ethernet cable from a

PoE switch to the PoE In port on

the TPE-102S.

3. Connect the Ethernet cable from

the Data-Out port on the

TPE-102S to the non-PoE device's

LAN port (e.g. TEW-450APB).

4. Connect the provided Jumper

cable to a non-PoE device (e.g.

TEW-450APB) and to the

TPE-102S.

Your installation is now complete.

To ensure the highest level of customer service and support, please take a moment to

www.trendnet.com/register

Thank you for choosing TRENDnet

English

Table of Contents

Tpe-102s Tpe-101i - power over ethernet injector