TRENDnet TPE-102S - QUICK User Manual
Injector/splitter
Hide thumbs
Also See for TPE-102S - QUICK:
- Datasheet (2 pages) ,
- Quick installation manual (12 pages) ,
- User manual (10 pages)
Advertisement
Quick Links
TPE-101I/TPE-102S
Injector/Splitter
User's Guide
Injecteur TPE-101I /Splitter TPE-102S
Guide de l'utilisateur
TPE-101I Injector/TPE-102S Splitter
Benutzeranleitung
Guía del Usuario
inyector TPE-101I/ splitter TPE-102S
Version 01.04.05
Copyright ©200 .
6 All Rights Reserved.
TRENDware International, Inc.
Advertisement
Related Manuals for TRENDnet TPE-102S - QUICK
Summary of Contents for TRENDnet TPE-102S - QUICK
- Page 1 TPE-101I/TPE-102S Injector/Splitter User’s Guide Injecteur TPE-101I /Splitter TPE-102S Guide de l'utilisateur TPE-101I Injector/TPE-102S Splitter Benutzeranleitung Guía del Usuario inyector TPE-101I/ splitter TPE-102S Version 01.04.05 Copyright ©200 . 6 All Rights Reserved. TRENDware International, Inc.
-
Page 2: Table Of Contents
Table of Contents English ...................... 1. Prepare for Installation ..............2. Product Detail ..................3. Hardware Installation ................ Troubleshooting .................. -
Page 3: English
If you run into problems, please refer to the Troubleshooting section of this guide. If you need further technical support, please visit www.TRENDNET.com or call technical support by phone. Verify Package Contents Please make sure you have everything in the box:... -
Page 4: Product Detail
2. Product Detail TPE-101I The TPE-101I has a RJ-45 connector for data, a RJ-45 connector for Power- over-Ethernet, and a power adapter connector. It also has two LEDS that indicate power and Power-over Ethernet. LED for Power Adapter LED for Power-over-Ethernet Jumper Cable Connector... - Page 5 TPE-102S The TPE-102S has a RJ-45 connector for Power-over-Ethernet, a RJ-45 connector for data, and a jumper cable connector. It also has two LEDS that indicate Power Output and Power-over Ethernet. LED for Power Output LED for Power-over-Ethernet Jumper Cable Connector RJ-45 connector for Data RJ-45 connector for Power-over-Ethernet...
-
Page 6: Hardware Installation
3. Hardware Installation Using the TPE-101I for a PoE device 1. Connect the power adapter to the DC 48V IN connector. 2. Using a CAT 5 cable, connect a switch's port to the TPE-101I's Data In port. 3. Using a CAT5 cable, connect a PoE device to the TPE-101I's PoE OUT. English... - Page 7 Using the TPE-102S for a non-PoE device 1. Using a CAT5 cable, connect a PoE Injector to the TPE-102S' PoE IN port. 2. Using a CAT 5 cable, connect a non-PoE device (e.g. access point) to the TPE-102S' Data Out port. 3.
- Page 8 Using the TPE-101I and the TPE-102S for a non-PoE device 1. Connect the power adapter to the DC 48V IN connector. 2. Using a CAT 5 cable, connect a switch's port to the TPE-101I's Data In port. 3. Connect a CAT5 cable from the TPE-101I's PoE OUT to the TPE102S' PoE IN port.
-
Page 9: Troubleshooting
Troubleshooting Why is the POWER GOOD LED off on the TPE-101I? Make sure that the PoE splitter or PoE device is connected properly to the TPE-101I. Why are both LEDs off on the TPE-102S? Make sure that the PoE injector or TPE-101I is connected properly to the TPE-102S. - Page 10 Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.TRENDNET.com TRENDnet Technical Support US Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany France Italy Spain Switzerland UK) Toll Free Telephone: +00800 60 76 76 67...