Transfer Of Ownership - Grant Aerona HPIDR32SMART6 Installation & Operating Instructions Manual

H.1.3 REMOTE ACCESS MANAGEMENT
Within the ecoNET account via the web-portal, the homeowner
can also control remote external access rights to their smart
controller installation. This setting applies to all available external
access accounts.
• Navigate to 'DEVICE SETTINGS' on the web-portal home
screen.
• Locate 'OTHER SETTINGS' at the bottom of the list on
screen.
• The label given to the installation will be displayed along with
a drop down that will present the 3 options available.
- Preview – Read only access
- Modification – Edit access
- Forbidden – No access
H.1.4

TRANSFER OF OWNERSHIP

If the smart controller is assigned to an account, that account will
need to removed from ecoNET24 to release the UID.
An existing homeowner can remove their account via the web
based ecoNET portal.
• Navigating to the top right corner, selecting the 'PERSON
ICON' and then 'MY ACCOUNT' from the drop down menu.
• In the left-hand menu, select 'REMOVE ACCOUNT'.
• The remove account page will prompt for the user to enter
the current password for the account to.
• After entering the current password click the 'DELETE' button
to confirm.
An incoming homeowner without an ecoNET account will need
an unassigned UID to start the registration of their ecoNET24
account. (Refer to Section H.1.1).
! NOTE !
A device UID can only be registered to a single ecoNET24
homeowner account.
H.1.5 G1 REMOTE ACCESS ACCOUNT
This account level is available to G1 heat pump installers
only and can only be accessed via the ecoNET web-based portal.
G1 heat pump installers can apply for this account level through
their G1 Portal.
• In the left-hand navigation menu, click on 'ECONET24
APPLICATION' and complete the form.
• Following submission, this form will be sent to the software
provider and a copy to the Pre-Sales Technical Team.
• The Grant Pre-Sales technical team will issue login details
including a temporary password to the G1 heat pump
installer via email within 48 hours.
• The installer should consider changing their password on
their first log in.
We recommend this account be setup in advance of their first (or
next) Aerona smart controller installation. This will allow the G1
installer to both check the functionality and demonstrate it for the
homeowner.
For the installer to add a controller to their account, the
homeowner account must first be registered.
• Navigate to the top right corner, selecting the person icon
and then 'MY ACCOUNT' from the drop down menu.
• In the left hand menu, select 'MANAGE DEVICES'.
• Enter the UID into the 'ADD CONTROLLER' field and click
Submit.
To allow permission for remote access the homeowner must
toggle the remote access rights to be either 'PREVIEW' (read
only) or 'MODIFICATION'. Refer to Section H.1.3.
Appendix H: ecoNET
For more information about the G1 Installer Scheme, please visit:
Table H-1: QR Code - G1 Scheme Overview
QR Code Link
GrantUK G1 Scheme Overview
www.grantuk.com/professional/g1-scheme/
Page 67