Setup Instructions For Windows Nt4.0 - TRENDnet TFM-PCIV92A User Manual

Hide thumbs Also See for TFM-PCIV92A:

Table of Contents

Section 2.3.5

Setup instructions for Windows NT4.0

STEP 1.

Insert the Modem Driver CD-ROM disk attached with your modem into the CD-ROM drive device,

Then run <CD-ROM letter>:\Drivers\ NT4\Setup.exe as shown in figure.

STEP 2.

And then, a prompt screen will ask you to ensure to install the modem driver.

Then click OK.

The setup utility will copy the needed files into windows system.

STEP 3.

The prompt screen will ask you to restart to enable the modem driver.

Then click on OK.

STEP 4.

The system will restart your system. If there is no error message while the system is re-booting,

your modem has been set up properly and functionally.

- 8 -

Rev. 1.00.2.1.63

Table of Contents