System Setup; Setup Instructions For Windows 98 - TRENDnet TFM-PCIV92A User Manual

Hide thumbs Also See for TFM-PCIV92A:
Table of Contents

Advertisement

Section 2.3

System Setup

Section 2.3.1

Setup instructions for Windows 98

STEP 1.
After you complete the modem hardware installation, turn on your PC. The Windows system will
automatically detect your new added devices. Windows system will prompt you with an "Add New
Hardware Wizard".
Then click on Cancel.
STEP 2.
Insert the Modem Driver CD-ROM disk attached with your modem into the CD-ROM drive device,
Then run <CD-ROM letter>:\drivers\Win98\Setup.exe as shown in figure.
Then click on OK
STEP 3.
And then, a prompt screen will ask you to ensure to install the modem driver.
Then click OK.
The setup utility will copy the needed files into windows system.
STEP 4.
If there is no error message while the system is installing, your modem has been set up properly
and functionally.
- 4 -
Rev. 1.00.2.1.63

Advertisement

Table of Contents
loading

Table of Contents