Section 2.3.7
Setup instructions for Windows 2000
STEP 1.
After you complete the modem hardware installation and turn on your PC, Windows system will
automatically detect your new added devices. Windows system will prompt you with an Add New
Hardware Wizard.
Click on Cancel.
STEP 2.
Insert the Modem Driver CD-ROM disk attached with your modem into the CD-ROM drive device,
then run <CD-ROM letter>:\drivers\Win2K&XP\Setup.exe as shown in figure.
Then click on OK.
STEP 3.
And then, a prompt screen will ask you to ensure to install the modem driver.
Then click on OK.
The setup utility will copy the needed files into windows system.
- 10 -
Rev. 1.00.2.1.63