Group Mesh Tm Pairing Up; Group Mesh Tm; Joining An Existing Group Mesh Tm; Open Mesh Tm - Nolangroup n-com R Series Manual

11. GROUP MESH
With Group Mesh , users can freely communicate with each other in the same private group in
TM
Group Mesh. For closed intercom conversations using Mesh Intercom, a Group Mesh needs to be
created by the users. Up to 24 users can all be connected in each private group.
11.1. Group Mesh TM
Important: The procedure described below refers exclusively to the pairing up between the
"600"/"900" series N-Com systems.
Make sure the systems are turned off.

Put the systems in "Pairing up" menu: press the "ON" key and keep it pressed for 4 seconds, until

you hear the voice announcement "
On both systems, press the key "" until you reach the option "

The Intercom connection is automatically activated at the end of the pair up procedure.
11.2. Joining an existing Group Mesh
Further users can be added to the Group Mesh
section 12.1 with one of the users who already belong to the group.
12. OPEN MESH
TM
Open Mesh is an open group intercom function. Users can freely communicate with each other in the
same Open Mesh channel and select which channel (1-9) to use through the headset. It can connect
with a virtually unlimited number of users in each channel.
Open Mesh does not require any pairing procedure. It can be enabled by tapping twice the N button
to start a communication in the pre-set channel.
12.1. Open Mesh
TM
To select one of the nine Open Mesh
Keep "n" key pressed for 3 seconds;

Press the "" or "" key to select the channel;

Press "ON" key to confirm the selection.

TM
pairing up
Pairing up Menu
TM
channel selection
channels:
TM
".
Group Mesh
by carrying out the same procedure explained in
TM
pairing
TM ".
19