TRENDnet TEW-630APB User Manual page 33

Tool_System
This section allows you to manage the Access Point's configuration settings, reboot the Access Point,
and restore the Access Point to the factory default settings. Restoring the unit to the factory default
settings will erase all settings, including any rules that you've created.
Save Settings To Local Hard Drive
This option allows you to save the Access Point's configuration to a file on your computer. Be
sure to save the configuration before performing a firmware upgrade.
Load Settings From Local Hard Drive
Use this option to restore previously saved Access Point configuration settings.
Restore To Factory Default Settings
This option restores all configuration settings back to the settings that were in effect at the
time the Access Point was shipped from the factory. Any settings that have not been saved
will be lost. If you want to save your Access Point configuration settings, use the Save
Settings option above.
Reboot The Device
This restarts the Access Point.
Page 33