TRENDnet TEW-630APB User Manual page 22

Basic_Network Settings
Access Point Settings
These are the settings of the LAN (Local Area Network) interface for the Access Point. The
Access Point's LAN settings are configured based on the IP Address and Subnet Mask assigned
in this section. The IP address is also used to access this Web-based management interface.
Get LAN IP From
Choose "DHCP (Dynamic)" if your router supports DHCP and you want the router to assign an
IP address to the AP. In this case, you do not need to fill in the following fields. Choose "Static
IP (Manual)" if your router does not support DHCP or if for any other reason you need to
assign a fixed address to the AP. In this case, you must also configure the following fields.
Note that you cannot choose "DHCP (Dynamic)" if you have enabled the "DHCP Server" option
on the DHCP page; the AP cannot be both a DHCP client and a DHCP server.
Page 22