MFJ-492/492X
Menu Driven Memory Keyer '
The MFJ-492 Menu Driven Memory Keyer™ is a full featured keyer with an easy to use menu driven
interface.
This unit has four soft sectored message memories for a total of 192 characters.
The MFJ-
492X Menu Driven Memory Keyer™ is the same keyer but has message memory expanded to 8 separate
1000 character message memories, giving the unit the "X" designation.
The keyer can repeat messages
continuously, insert timed pauses within messages, insert an auto-incrementing serial number, and have
messages call other messages.
The MFJ-492 has adjustable controls for speed and volume on the front of the unit.
Also, the speed,
weight, and sidetone frequency are adjustable through menu selection or paddle command.
Other
modes
such as Hand
Key, Semi-auto,
Reverse
Paddle,
Iambic
On/Off,
Iambic
A/B,
Queue,
are
accessed through menu selection or paddle command.
The MFJ-492 has both Direct and Grid-Block
outputs and a port for an optional remote control.
INSTRUCTION
MANUAL
CAUTION:
Read All Instructions Before Operating Equipment
MFJ
ENTERPRISES,
INC.
P.O. BOX 494, MISSISSIPPI]
STATE, MS 39762. USA
REVISION
1.0
COPYRIGHT
©
1993
MFJ
ENTERPRISES,
INC.
Need help?
Do you have a question about the Menu Driven Memory Keyer MFJ-492 and is the answer not in the manual?
Questions and answers