Fitbit Zip Aria Manual page 2

Getting Prepared
Before setting up your scale, complete these prerequisite steps:
1. Restart the computer or mobile device that you're going to use to set up your scale.
2. Make sure you know your Wi-Fi password and that it doesn't exceed 31 characters. For help
finding your password, see How do I verify my WiFi password before setting up Aria?
3. If you're using a computer:

Place your scale within 10 feet of your router.

Ensure that your router is compatible with the 802.11b protocol. See What router settings do
I need for my Aria to work?

If the router is connected to your computer with an Ethernet cable, unplug it. The router and
computer must be connected over Wi-Fi.
Connecting your Aria® to an unsecured Wi-Fi network is a security risk. Make sure your network is
secure.
Setting up your Aria Using the Web (step-by-step)
To set up your Aria:
1. Open a web browser on your computer, smartphone, or tablet and go to
www.fitbit.com/scale/setup/start.
2. Click Get started, then click it again when you see the pop-up message.
3. Sign in to your fitbit.com account.
4. Personalize your Aria by giving it a name and entering the initials you'd like to see on the
scale when it recognizes you.
5. Put the scale into setup mode by removing a battery for 10 seconds and then reinserting
it. Click Continue when the scale's display reads "SETUP ACTIVE."
6. Switch to the scale's Wi-Fi network (this will appear as the word "Aria" followed by six
characters).
 On a smartphone/tablet—go to your device's Wi-Fi settings and select your Aria
from the list of available networks.
 On a computer—click on the Wi-Fi icon in your menu or taskbar and select your
Aria from the list of available networks.