Page 1
Please Read Carefully before Installation • Please check the surface of the bath PRIOR to installation • Installation of any Decina product should be carried out by a QUALIFIED Licensed Plumber only. Congratulations on your purchase of this high quality Decina pressed metal bath...
Page 2
Installation against one, two or three walls Every Decina pressed metal bath is supplied with Decina’s unique “Tiling bead” ,(Fig 1) and so there is no need to check the bath into the wall. Simply notch the tiling bead in line with the corners of the bath on the sides which will be against the wall or walls and fix to the bath by applying silicone on the inside of the bead and clip it in place on the relevant sides of the bath.
Page 3
• The product has been installed by following the instructions provided. Exclusions Decina excludes all liability within the law, for damage or injury to any person, damage to any property, and any indirect consequential or other loss or damage Note: These installation, care and maintenance instructions are not exhaustive so if in any doubt please contact your nearest Decina Customer Service Representatives, using the contact details below.
Need help?
Do you have a question about the Giorgia and is the answer not in the manual?
Questions and answers