Solight KP09 Manual

EN KP09
Fan heater 400W
Thank you for purchasing our equipment. Please read this manual carefully and heed the safety warnings and instructions before
installing, using or repairing the equipment. This will ensure not only the protection of persons, but also the long life of the equipment.
DESCRIPTION OF EQUIPMENT
Temperature
reduction button
Fan speed button
SAFETY NOTICE
When using electrical appliances, basic safety precautions should always be observed to reduce the risk of fire, electric shock and
personal injury, including the following:
- To reduce the risk of fire or electric shock, plug the device into a power outlet.
- To reduce the risk of fire or electric shock, do not use the device with an extension cord.
- Do not plug anything else into the same circuit. If you are unsure if you meet this specification, consult a certified electrician
before use. Failure to comply may result in fire, overheating, malfunction, property damage and personal injury.
- Do not connect the appliance to extension cords, surge protectors, timers, direct circuit breakers, or to an outlet with other
appliances connected to the same outlet. Failure to do so may result in risk of overheating, malfunction, property damage and
personal injury.
- The device heats up during use. Wear gloves when moving it to avoid burning your skin.
- Do not leave the equipment unattended. Extreme caution is required if children are using the device or if pets are nearby.
- Always unplug the device when not in use.
- Do not use the device with a damaged plug, if damaged or dropped. If the device is damaged, repairs must only be carried out
by the manufacturer's authorised service centre.
- Do not use the device outdoors.
- The device is not intended for use in bathrooms, laundry rooms or similar rooms. The equipment is not intended for use in
locations where GFCI outlets are used.
- Never place the device where it could fall into a bathtub or other container of water.
- To turn the device off, turn the switch to the off position and unplug the power cord from the power outlet.
- Prevent objects from entering the ventilation or exhaust opening. Do not cover any part of the equipment.
- Do not place the device on soft surfaces such as a bed. Choose a suitable location with a firm base and approximately 1 m of
clearance on all sides.
- The device has hot parts inside. Do not use it in areas where gasoline, paints and other flammable substances are used or stored.
- Use this device only as described in this manual. Any other use not recommended by the manufacturer may cause fire or injury.
Temperature increase
button
Display
Timer button
On/Off switch