Replacing The Clock Battery - Dukane ImagePro 8100 User Manual

Dukane imagepro 8100: user guide
Hide thumbs Also See for ImagePro 8100:
Table of Contents

Advertisement

15. Replacing the clock battery

This projector has internal clock that uses a battery. When the clock of the network
function does not work correctly, please try solution by replacement of the battery:
HITACHI MAXELL , part number CR2032 .
1.
Turn the projector off and unplug the power
cord from the power outlet. And cool the
projector down by leaving it for a while as it is.
2.
Place gently the projector upside down.
3.
Remove the battery cover.
Turn the battery cover in the direction indicated
as " OPEN " till it unlocks using a coin or
something similar. When finishing turning the
battery cover, pick its knob to remove it.
4.
Take the old battery out.
Press the metal claw of the battery holder. Then
the battery will come up. Remove it.
5.
Put the new battery into the battery holder,
according to the polarity markings (-) inside
the holder, so that the side marked (+) of the
battery is facing upward. Push the battery into
the battery holder fully to fix.
6.
Put the battery cover into place, then turn it in
the direction indicated as " CLOSE " until it
fixed, using a coin or something similar.
NOTE
• The internal clock will be initialized by removing the battery. For setting the clock, see
the Network Guide in the CD.
WARNING
■ Be careful of handling a battery, as a battery can cause explosion, cracking or leakage,
which could result in a fire, an injury, and environment pollution.
• Use only the specified and perfect battery. Do not use a battery with damage, such as a
scratch, a dent, rust or leakage.
• When a battery leaked, wipe the leakage out well with a waste cloth. If the leakage
adhered to your body, immediately rinse it well with water. When a battery leaked in
the battery holder, replace the batteries after wiping the leakage out.
• Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Do not work on a battery; for example recharging or soldering.
• Keep a battery in a dark, cool and dry place. Never expose a battery to a fire or water.
• Obey the local laws on disposing a battery.
6
Battery cover
Close
Open
Metal claw

Advertisement

Table of Contents
loading

Table of Contents