XDVD8182
General Operation
INFO/PIC
SHARPNESS
CONTRAST
BRIGHTNESS
Monitor Angle
SYSTEM RESET
16
OPERATION
Press INFO button for 1 sec to display DVD disc information.
Press and hold INFO for secs to change TFT LCD BRIGHTNESS:
Press ANGLE to increase, ANGLE to decrease, or use VOLUME rotary to
adjust the level up or down. (0 minimum / 0 maximum) 10 is default.
Adjustments to SHARPNESS, CONTRAST, COLOR, BRIGHTNESS & TINT are only
possible while in either iPod, AUX-IN or CAMERA CVBS mode.
COLOR
While in iPod, AUX-IN or CAMERA mode:
Press and hold INFO for secs to access PICTURE MENU, press briefly to step to
TINT
next selection:
PICTURE MENU
[SHARPNESS
[CONTRAST
[COLOR
[BRIGHTNESS
[TINT
Press ANGLE to increase the monitor view angle.
Press ANGLE to decrease the monitor view angle.
The monitor angle can be adjusted to 16 different positions or set to 6 preset
positions within the touch screen OSD setup menu.
Notes:
• Do not attempt to move the monitor up/down by hand - severe damage will
occur. Use the front panel buttons or the remote control only.
• The color of the LCD monitor varies between viewing angles. Select the angle
with the most optimum view for your location.
• The last position of the monitor will be saved in memory. The monitor will
return to its last position automatically the next time it is opened.
If you experience abnormal operation or, your unit is inoperable, press the
RESET button for 3 seconds, located on the front bottom-right corner of the unit.
After a system reset, the unit restores all factory default settings.
Notes: Use the tip of a pen to access the button.
10
10
10
10
10