Hughes HIRD-D2 Owner's Manual page 22

DIRECTV SYSTEM FROM HUGHES NETWORK SYSTEMS - OWNER'S MANUAL
If you decide to install the satellite dish antenna yourself, we recommend you purchase the Do-It-
Yourself Instillation Kit. It contains many items you will need to complete most installations.
You will need some of the following tools, depending on your installation:
•
Electric drill
•
Drill bits (1/8-inch,
3/16-inch, 1/2-inch
masonry)
•
Carpenter's level
•
Pencil or chalk
Confirm that you have all of the satellite dish antenna kit components.
•
Steel reflector (1)
•
Mast (1)
•
Base plate (1)
•
LNB support arm (1)
If you are missing any parts contact the Customer Care Center at 1-800-274-8995.
P 4-4
AGE
remove it safely.
•
Tape measure
•
Wrenches (3/8-inch,
7/16-inch, or
adjustable)
•
Hammer
•
Hole digging tools
•
LNB (1)
•
_-inch nuts (5)
•
Retainer screw (2)
•
Cable clip (1)
•
Wheelbarrow or
concrete mixing box
•
Hacksaw
•
Sledge hammer
•
Flat blade screwdriver
•
Phillips screwdriver
•
Flat head screws (4)
•
_-20 x _-inch
grounding bolt (1)