Table of Contents
Advertisement
DIRECTV SYSTEM FROM HUGHES NETWORK SYSTEMS - OWNER'S MANUAL
For the rating limit to be enforced, the digital satellite receiver must be locked. Locking is
described earlier in this chapter.
Max Spending
{ XE "SPENDING LIMIT screen" } { XE "MAIN MENU:Spending limit" } PPV access enables you to
purchase special, limited-broadcast events such as sporting events
and movies. You can set the maximum purchase price on a per-event
basis. To change the displayed limit, highlight the Max Spending
button and press
to display the SPENDING LIMIT pop-up
panel. When the digital satellite receiver is locked, the passcode will
be needed to change the ratings limit.
Use the number keys on the remote control to set the limit or use the
and
keys to increase or decrease each digit. Use the
and
keys to highlight the digit that you want to change. The maximum
limit is $655.
Highlight OK and press
to confirm the entered amount.
Selecting Cancel will leave the spending limit unchanged.
The RATING pop-up panel
For the spending limit to be enforced, the digital satellite
receiver must be locked as described earlier in this chapter.
Channel Lists
Channel Lists are provided to help you organize the hundreds of available channels into groupings that
suit the needs of your household. Each list can contain as many or as
few channels as you would like. { XE "MAIN MENU:Fav. Lists"
} You can customize these groupings in a variety of ways. For
example, Fav. A could be Dad's favorite channels, Fav. B could be
Mom's favorites, Fav. C could be the kids' channels, and Family
could be all channels that Mom and Dad have deemed appropriate
for the entire family. Each of the lists, with the exception of Family,
can be renamed.
NOTE: Once the digital satellite receiver is locked, only existing
Family list channels will be accessible. If the Family list has not
had channels added to it, no channels can be viewed without first
unlocking the digital satellite receiver. To avoid this
inconvenience, set up the Family list before locking the digital
The CHANNEL LISTS setup screen
satellite receiver.
Places to go from the CHANNEL LISTS screen
Rename
{ XE "SETUP MENU:Default Audio" } When you highlight the Rename button and press the
key, a Rename List pop-up menu appears. You can choose any of the first three lists to be renamed.
The All, Family, and Top 10 lists cannot be renamed. Once you have selected a list, a Rename List
entry keyboard pop-up panel appears. You can highlight the desired letter using the , , , and
keys. Press
to enter the letter. When you have finished, choose OK.
Auto Set
AutoSet is designed { XE "SETUP MENU:Default Audio" } to help in the initial programming of your
channel lists. When you select the Auto Set button, a pop-up menu appears showing each of the
channel lists. Highlight and select a channel list to be programmed. Once selected, the Auto Set
Progress pop-up status panel appears. It will take several minutes for the digital satellite receiver to
scan through all channels and determine which ones you are authorized to receive. The results of this
scan will be stored in the designated channel list.
P
7-12
AGE
Advertisement
Table of Contents
