Source Delete; On-Screen Display; Quick Select Name; Remote Id Setup - Denon AVR-789 Owner's Manual

d Source Delete
Remove input sources that are not used from the display.
[Selectable items]
ON
: Use this source.
Delete
: Do not use this source.
Default
Resets the settings to the default values.
NOTE
• Input sources being used in the various zones cannot be deleted.
• Input sources set to "Delete" cannot be selected using
SELECT
.
f On-Screen Display
Make on-screen display related settings.
Screensaver
Make screensaver settings.
Use the screensaver to prevent burn-in on the monitor screen.
When set to "ON", the screensaver is activated if there is no activity
for about 3 minutes.
[Selectable items]
ON
: Activate the screensaver if there is no activity for about 3
minutes.
OFF
: Turn the screensaver function off.
When "Screensaver" is set to "ON" , the screensaver is activated if
no operation is performed for about 3 minutes.
When you press uio p , the screen saver is cancelled and the
screen before that screen saver started is displayed.
Text
Input source and mode display.
[Selectable items]
ON
: Turn display on.
OFF
: Turn display off.
Master Volume
Master volume display during adjustment.
[Selectable items]
ON
: Turn display on.
OFF
: Turn display off.
Tuner Information
This sets the time the on-screen display is displayed when a tuner
operation is performed.
[Selectable items]
Always
: Show display continuously.
SOURCE
30sec
: Show display for 30 seconds after operation.
10sec
: Show display for 10 seconds after operation.
OFF
: Turn display off.
iPod Information
This sets the time the on-screen display is displayed when an iPod
operation is performed.
[Selectable items]
Always
: Show display continuously.
30sec
: Show display for 30 seconds after operation.
10sec
: Show display for 10 seconds after operation.
OFF
: Turn display off.
Display Mode
Select the on-screen display's display mode.
[Selectable items]
Mode1
: If there is no video signal, flickering of the on-screen
display is not prevented.
Mode2
: Prevents flickering of the on-screen display when there is
no video signal.
Use this mode if the on-screen display does not appear
in the Mode 1, as may happen according to the TV being
used.
For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 18).
g Quick Select Name
Change the Quick Select name.
Up to 16 characters can be input.
[Input characters]
A ~ Z a ~ z 0 ~ 9 ! # % & ' ( ) * + , - . / : ; = " ? @ [ \ ] (space)
Default
Resets the settings to the default values.
h Remote ID Setup
Set remote control ID.
[Selectable items] 1 2 3
NOTE
When using the AVR-789 with only the included remote control
unit (RC-1099), use Remote ID "1" (default).
When using a separately sold remote control unit (RC-7000CI, etc.),
this function can be used. Match the ID setting of the remote control
unit and the receiver.
ENGLISH ENGLISH
4