Ipod; Tv/Cable Tuner; Connecting The Recording Components; Video Cassette Recorder - Denon AVR-789 Owner's Manual

ENGLISH

iPod

®
Use a DENON control dock for iPod (ASD-1R, ASD-3N or ASD-
3W sold separately) to connect the iPod to the AVR-789. For
instructions on the control dock for iPod settings, refer to the
control dock for iPod's operating instructions.
iPod
R L
R L
• With the default settings, the iPod can be used connected to
the VCR (iPod) connector.
• To assign the iPod to a connector other than VCR (iPod), make
the settings at menu "Input Setup" – "(input source to which
iPod dock assigned)" – "Assign" – "iPod Dock" (vpage 38).


TV/CABLE Tuner

Select the terminal to use and connect the device.
TV tuner
L R
L R
When using a coaxial cable for the digital audio connection,
make the settings at menu "Input Setup" – "Assign" – "Digital
In" (vpage 38).
Connecting the Recording
Components
Carefully check the left (L) and right (R) channels and the inputs and outputs, and
be sure to interconnect correctly.

Video Cassette Recorder

Select the terminal to use and connect the device.
Video cassette recorder
L
L
• When recording via the AVR-789, the playback device's cable must be of the
same type as the cable used to connect the AVR-789's VCR OUT connector.
Example: TV IN → S-Video cable : VCR OUT → S-Video cable
TV IN → Video cable : VCR OUT → Video cable
• When using a component video cable for the video connection, make the
settings at menu "Input Setup" – "Assign" – "Component In" (vpage 38).
NOTE
Do not connect the output of the component connected to the AVR-789's
OPTICAL2 output connector to any input connector other than OPTICAL2.
R L R
R L R