Setting The Denon Link; Setting The Ext. In Setup - Denon AVR-4806 Operating Instructions Manual

Advanced Setup – Part 1

Setting the DENON LINK

• When a DENON DVD player and the DENON LINK have
been connected, be sure to make a setting to "DENON
LINK" with the System Setup Digital In Assignment.
• When the input mode is AUTO and the signals are not be
able to transferred by DENON LINK, the unit automatically
changes over the input to the selected signals (ANALOG,
EXT. IN or IEEE1394).
• Refer to "DENON LINK connections" (
1
CURSOR
Press the
input source, then press the
button to select the "DLINK".
2 CURSOR
Press the
"DLINK" setting, then press the
G G button to select the input signal (ANALOG,
EXT. IN or IEEE1394).
Select the input for the playback of signals that cannot
be transferred by DENON LINK.
page 34).
D D or H H button to select the
CURSOR F F or G G
D D or H H button to select the
CURSOR F F or

Setting the EXT. IN Setup

• Set the method of playback of the analog input signal
connected to the EXT. IN (8CH) terminal.
• Refer to "Connecting the external inputs (EXT. IN) terminals"
( page 30).
1
CURSOR
Press the
"EXT. IN Setup" at the "Audio Input Setup"
menu, then press the
• Display the "EXT. IN Setup" screen.
2
CURSOR
Press the
item to be set, then press the
button to select the parameter.
Surr. Sp:
Presets the surround speakers that are used in the
EXT. IN mode.
Select according to the specifications of the player
being used. Also refer to the player's operating
instructions.
• Surr. A:
Select when using surround speakers A.
• Surr. B:
Select when using surround speakers B.
• Surr. A+B:
Select when using both surround speakers A and
B.
SW Level:
Sets the playback level of the analog signal that
was input to the EXT. IN subwoofer terminal.
Select according to the specifications of the player
being used. Also refer to the player's operating
instructions.
+15dB (default) recommended. (0, +5, +10 and
+15 can be selected.)
3
ENTER
Press the
• The "Audio Input Setup" menu reappears.
90
D D or H H button to select the
ENTER
button.
D D or H H button to select the
CURSOR
F F or G G
button to enter the setting.