Denon AVR-1912 Owner's Manual page 97

Notes concerning use of "Firmware Update" and "Add New Feature"
• In order to use these functions, you must have the correct system requirements and settings for a
broadband Internet connection (vpage 12).
• Do not turn off the power until updating or upgrading is completed.
• Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/
upgrading procedure to be completed.
• Once updating/upgrade starts, normal operations on this unit cannot be performed until updating/
upgrading is completed.
• Furthermore, updating/upgrading the firmware may reset the backup data for the parameters, etc. set
for this unit.
• If the update or upgrade fails, press and hold the
seconds, or remove and re-insert the power cord. "Update retry" appears on the display and update
restarts from the point at which update failed. If the error continues despite this, check the network
environment.
• Information regarding the "Firmware Update" function and "Add New Feature" will be announced on
the DENON web site each time related plans are defined.
• When usable new firmware is released with "Firmware Update" or "Add New Feature", a notification
message is displayed on the menu screen. When you do not want to be notified, set "Notification" –
"Update" (vpage 91) and "Upgrade" (vpage 91) to "OFF".
BD
ON/STANDBY
on the main unit for more than 5
Language
Set the language for display on the menu screen.
English / Español
"Language" can also be set by the following procedure. However, the menu screen is not displayed.
PRESET 1
1. Press and hold the main unit's
"V.Format:<NTSC>" appears on the display.
STATUS
2. Press the main unit's and set "Lang:<ENGLISH >".
TUNER PRESET CH +, –
3. Press the main unit's
INTERNET RADIO
4. Press the main unit's
94
Default settings are underlined.
Setting details
PRESET 3
and for at least 3 seconds.
and set the language.
V to complete the setting.
System Setup