Denon AVR-1912 Owner's Manual page 96

Setting items
GUI Tuner : Set the tuner screen display time when the input source is
(Continued) "Tuner".
• Always : Show display continuously.
• 30s : Show display for 30 seconds after operation.
• 10s : Show display for 10 seconds after operation.
• OFF : Turn display off.
iPod : Set the iPod screen display time when the input source is "DOCK"
or "iPod (USB)".
• Always : Show display continuously.
• 30s : Show display for 30 seconds after operation.
• 10s : Show display for 10 seconds after operation.
• OFF : Turn display off.
Remote Setup Guide See "Registering preset codes" (vpage 102).
Search a preset code to
register in the remote
control unit.
• Up to 16 characters can be input.
Quick Sel.Name
Change the "Quick Select" • For character input, see page 73.
display title to one you
prefer.
Zone Rename • Up to 10 characters can be input.
Change the display title of • For character input, see page 73.
each zone to one you prefer.
Dimmer Bright : Normal display brightness.
Adjust the display Dim : Reduced display brightness.
brightness of this unit. Dark : Very low display brightness.
OFF : Turns the display off.
ON : Turn protection on.
Setup Lock
Protect settings from OFF : Turn protection off.
inadvertent change.
When canceling the setting, set "Setup Lock" to "OFF".
NOTE
When "Setup Lock" is set to "ON", the settings listed below can no
longer be changed. Also, "SETUP LOCKED!" is displayed if you attempt
to operate related settings.
• Menu operations
BD
Setting details
• Channel Level
Setting items
Firmware Update Check for Update : Check for firmware updates. You can also check
Update the firmware of the approximately how long it will take to complete an update.
receiver. Start : Execute the update process.
When updating starts, the power indicator becomes red and the menu
screen is shut down. The amount of update time which has elapsed is
displayed.
When updating is complete, the power indicator becomes green and
normal status is resumed.
• If updating fails, the set automatically retries, but if updating is still not
possible, one of the messages shown below is displayed. If the display
reads as shown below, check the settings and network environment,
then update again.
Display
Updating fail
Login failed
Server is busy
Connection fail
Download fail
Add New Feature Upgrade : Execute the upgrade process.
Display new features that When updating starts, the power indicator becomes red and the menu
can be downloaded to this screen is shut down. The amount of update time which has elapsed is
unit and perform an update. displayed.
When upgrading is complete, the power indicator becomes green and
normal status is resumed.
• If the upgrade is not successful, an error message identical to those in
"Firmware Update" will appear on the display. Check the settings and
network environment, then update again.
Upgrade Status : Display a list of the additional functions provided by the
upgrade.
See the DENON website for details about updates.
When the procedure is complete, "Registered" is displayed in this
menu and updates can be carried out. If the procedure has not been
carried out, "Not Registered" is displayed.
The ID number shown on this screen is needed when carrying out the
procedure.
The ID number can also be displayed by pressing and holding the main
unit's
93
Setting details
Description
Updating failed.
Failure to log into server.
Server is busy. Wait a while then try again.
Failure in connecting to server.
Downloading of the firmware has failed.
TUNER PRESET + TUNER PRESET –
and for at least 3 seconds.
System Setup
vSee overleaf