Control Panel; Figure 4-5. Control Panel Removal - Dell OptiPlex GXa Service Manual

C
ontrol Panel
mounting screw
control panel cable

control panel

mounting tab

Figure 4-5. Control Panel Removal

To remove the control panel, follow these steps:
1. Disconnect the control panel cable from the PANEL connector on the
system board (see Figure 4-15).
2. From the inside of the chassis, remove the mounting screw holding the
control panel to the chassis.
3. Remove the control panel from the chassis.
When you reinstall the control panel, be sure to put the right side of the control
panel behind the mounting tab.
chassis
Removing and Replacing Parts on the Low-Profile Chassis 4-7