Dell Dimension 4200 Solution Manual page 48

48 Adding Parts
To insert a module, press out the securing clip at each end of the
5
memory module connector.
securing clips (2)
notches (2)
memory module
connector
cutouts (2)
step 5
step 6
Align the notches on the bottom of the module with the crossbars in
6
the connector.
NOTICE:
of the module.
Insert the module straight down into the connector, ensuring that it
7
fits into the vertical guides at each end of the connector. Press firmly
on the ends of the module until it snaps into place.
If you insert the module correctly, the securing clips snap into the
cutouts at each end of the module.
Close the computer cover (see page 59).
8
Connect your computer and devices to their electrical outlets, and
9
turn them on.
NOTICE:
wall jack and then plug it in to the computer.
memory module
connectors
step 7
To avoid breaking the memory module, do not press near the middle
To connect a network cable, first plug the cable in to the network
1
0