Troubleshooting; Assign Static Ip Address (Windows 2000/Xp) - D-Link DVG-2001S Manual

Voip terminal adapter

Hide thumbs Also See for DVG-2001S:

Table of Contents

DVG-2001S User's Manual

This section provides solutions to situations that can occur during the installation and

operation of the DVG-2001S Adapter.

1. How do I assign a static IP address in Windows XP/2000?

Please note that routers will automatically assign IP addresses to the computers on the network,

using DHCP (Dynamic Host Conﬁguration Protocol) technology. If you are using a DHCP-capable

router you will not need to assign static IP addresses.

If you are not using a DHCP capable router, or you need to assign a static IP address,

please follow these instructions:

Click Start.

Click Control Panel.

Double-click on Network

Connections.

D-Link Systems, Inc.

Troubleshooting

Table of Contents