D-Link DSL-500 Quick Install Manual page 10

7 7
Configuring the DSL-500/CZ Configuring the DSL-500/CZ
Click PPPoA Configuration in
the left column.
Enter the Login User Name
and Password, provided to you
by your Internet Service
Provider (ISP.)
Authentication is set to detect
automatically. If your current
selection does not work, select
"pap."
Please be certain that
"enabled" is displayed in the
"Connect On Demand" field.
Make sure PVC settings are
entered correctly:
VPI: "0"
VCI: "35"
Click OK
Note: VPI: "0" and VCI: "35" settings are most common among DSL
providers. This will not work for others who have different VPI and
VCI settings. Please contact your service provider for the correct VPI
and VCI settings.