Yolink YS8007-UC Installation & User Manual page 23

Sensor Calibration, Continued
P
How to Calibrate Your Sensor:
1. Open the sensor's Details screen and tap
Calibration.
2. The Calibration screen is displayed, as shown
below. To calibrate the temperature or humidity,
tap and hold the associated slider bar control,
then slide the control to the right, for a positive
offset, or to the left, for a negative offset. The
offset will be displayed with a "+" or "-" number.
For example, to adjust the temperature plus 1
degrees, tap and hold the Temperature control,
and slide it slowly to the right, until "+1.0°" is
displayed.
3. Tap the checkmark, to save your settings.
21