Access Control-Ip Address - D-Link DSL-2640B User Manual

Section 7 - Tools
Access Control—IP Address
Web access to the router can be limited when Access Control Mode is enabled.
Add the IP address to the IP address list by clicking on the
Add button, then select Enabled to enable Access Control
Mode.
If Access Control Mode is disabled, any workstation connected
locally to your router can access the web interface provided
the correct username and password is supplied at log on.
Enter the IP address of the management station permitted
to access the local configuration and click Apply. This will
return you to the previous screen where you can enable
access control.
D-Link DSL-640B ADSL+ 4-Port Router User Manual 65