Network Settings; Static - D-Link Xtreme N Duo DAP-1522 User Manual

Section  - Configuration
This section will allow you to change the local network settings of the bridge and to configure the Static settings.
LAN Use the drop-down menu to select Static IP if
Connection your ISP assigned you the IP address, subnet
Type:
mask, gateway, and DNS server addresses. Select
Dynamic IP (DHCP) to automatically assign an
IP address to the computers on the LAN/private
network.
Access Point Enter the IP address assigned by your ISP.
IP Address:
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
Default
Enter the Gateway assigned by your ISP.
Gateway:
Device Name: Enter the Device Name of the AP and click Next to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
D-Link DAP-15 User Manual

Network Settings

Static

5