Configure Wpa-Enterprise (Ap Mode) - D-Link Xtreme N Duo DAP-1522 User Manual

Section  - Security

Configure WPA-Enterprise (AP Mode)

It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please
establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption
due to the added overhead.
1. Log into the web-based configuration by opening a web browser
and entering the IP address of the access point (192.168.0.50).
Click on Setup and then click Wireless Settings on the left
side.
2. Next to Security Mode in the �ire�e�� Security Mode �ection,
select WPA-Enterprise.
3. Next to �PA Mode in the �PA �ection, select Auto (WPA or
WPA2), WPA2 Only, or WPA Only. Use Auto if you have wireless
clients using both WPA and WPA2.
4. Next to Cipher Type, select TKIP, AES, or TKIP and AES.
5. Next to Group Key Update Interva�, enter the amount of time before the group key used for broadcast and multicast
data is changed.
6. Next to RADIUS Server IP Addre�� in the EAP (802.1X) section, enter the IP Address of your RADIUS server.
7. Next to RADIUS Server Port, enter the port you are using with your RADIUS server. 1812 is the default port.
8. Next to RADIUS Server Shared Secret, enter the security key.
Click Save Settings at the top of the window to save your settings. .
9. Click
D-Link DAP-15 User Manual