Add Traffic Manager Rule - D-Link Xtreme N Duo DAP-1522 User Manual

Section  - Configuration

Add Traffic Manager Rule

In Traffic Manager Rule enter settings for each user of your network, using adequate IP (Client IP) or MAC address (Client
MAC). Set appropriate Ethernet to Wireless and Wireless to Ethernet speeds for the traffic you want to regulate.
Name:
Enter a name for your new rule.
Client IP
The IP address assigned to the client.
(optional):
Client MAC
By assigning MAC addresses to the set of traffic manager rules, specific rules can be defined for individual devices.
(optional) :
Ethernet to
Represents the available bandwidth for client data to be forwarded from Ethernet to wireless, the suggested range is 800 ~
Wireless:
96000kbits/sec.
Wireless to
Represents the available bandwidth for client data to be forwarded from wireless to Ethernet, the suggested range is 800 ~
Ethernet:
96000kbits/sec.
Note: Normally the wireless connection transmits application data packets based on the wireless to Ethernet speed and
Ethernet to wireless speed. Users can treat the two speeds as system transmission bandwidth, where all applications will
share the whole system bandwidth based on assigned priorities. Note that the maximum amount of bandwidth that can be
used is the same as the set value of both speeds.
D-Link DAP-15 User Manual