Related Manuals for Twister Display Big Splash Indoor Boot
Summary of Contents for Twister Display Big Splash Indoor Boot
- Page 2 Description Quantity Vinyl Booth Pump Hose Hose Clamp Hose Fitting GFCI Foot Switch Pipe A — 30.5” Pipes W/ Corner Fittings Pipe B — 30.5” Pipes Pipe C — 41.5” Pipes Pipe D — 44.5” Pipes (Swedged) Visit our website at: www.twisterdisplay.com W I S T E R I S P L A Y P.O.
- Page 4 1. Assemble two squares using 4 unswedged pipes and 4 corner fit- tings for each. 2. Insert swedged pipes in- to each corner of one square and the remaining unswedged pipes into the four corners of the other square. 3. Turn the two cubes onto their sides and slide them together.
- Page 5 4. Tip frame into its up-right position. Place the booth to the immediate right of the Big Splash. 5. Attach the vinyl booth using the ball bungees. 6. Put the pump in the back corner of the booth and run the cord through the hole provided.
- Page 6 8. Plug GFCI into a grounded 120-volt outlet. Plug the footswitch into the GFCI and then plug the pump into the footswitch.
- Page 7 8. Attach the tubing to the pump using the hose clamp. 9. Put a chair (with rubber tips on the legs) inside the booth, positioning it so that the water, when dumped from bucket will land on it. Instructions for Care 1.
-
Page 8: General Safety Instructions
General Safety Instructions 1. NEVER USE THE GAME IN STRONG WINDS OR LIGHTENING!! NEVER USE THE GAME IN STRONG WINDS OR LIGHTENING!! NEVER USE THE GAME IN STRONG WINDS OR LIGHTENING!! NEVER USE THE GAME IN STRONG WINDS OR LIGHTENING!! 2.
Need help?
Do you have a question about the Big Splash Indoor Boot and is the answer not in the manual?
Questions and answers