D-Link DI-804HV Manual page 53

Using the Configuration Menu
Advanced > SNMP
SNMP (Simple Network Management Protocol) is a widely used network monitoring and
control protocol that reports activity on each network device to the administrator of the
network. SNMP can be used to monitor traffic and statistics of the DI-804HV. The DI-
804HV supports SNMP v1 or v2c
Enable SNMP-
Local-
Remote-
Get Community-
Set Community-
SNMP v1-
SNMP v2-
(Simple Network Management Protocol)
LAN (Local Area Network)
WAN (Wide Area Network)
Enter the password public in this field to allow "Read only" ac-
cess to network administration using SNMP. You can view the
network, but no configuration is possible wth this setting.
Enter the password private in this field to gain "Read and Write"
access to the network using SNMP software. The administra-
tor can configure the network with this setting.
Simple Network Management Protocol (SNMP) is an applica-
tion layer protocl that facilitates the exchange of management
information between nework devices.
Enhanced version of SNMP v1 with additional protocol opera-
tions such as UDP, IP, CLNS, DDP, and IPX.
53