D-Link DI-804HV Manual page 100

Frequently Asked Questions (continued)
Why can´t I access the web based configuration? (continued)
Step 4 (continued)
in the same range of the device you are attempting to configure. Most D-Link devices
use the 192.168.0.X range.
How can I find my IP Address in Windows 2000/XP?
Step 1 Click on Start and select Run.
Step 2 Type cmd then click OK.
Step 3 From the Command Prompt, enter ipconfig. It will return your IP
Address, subnet mask, and default gateway
Step 4 Type exit to close the command prompt.
Check your IP Address. Your computer must have an IP Address
100